Cpumark Scores

Basically the same score as ETSA, since I have my CPU at 3.2Ghz right now.

cpumark.jpg
 
It hasn't crashed yet, but just to make sure it doesn't, I have 4 stress primes doing "Small FFT - Stress CPU" and I set each affinity to a different core. call me a noob, but I used this guide. So far it's been about 10 minutes and it hasn't crashed yet...but the 4 cores are around 73 C each so I'm gonna lower the voltage under 2.7v...and for multi-core'd processors, people say not to trust the bios reading of the 'Processor Temperature', but rather to run a program like core temp to check the actual temperatures of your cores...My bios and the in-windows program that the mobo manufacturer gave me both tell me that my processor temperature is at 30-35C on load, BUT, while this is so, core temp gives me about 50-60C per core...
 
How are the load temps? (curious cause we have similar setups would like to oc soon)

Edit I see, I would trust core temp, it seems to be the most accurate, those are decent temps
 
The thing I'm worried about is that in the guide I used, the writer was using the same cpu cooler as me, except he lapped his, and after ocing to 3.0ghz he said that the temps should be far below 50 C...and if you're curious, when I was running the stress tests, the 'Processor temperature' was around 38-40C and the cores were around 73-75C each
 
You must log in or register to reply here.
Back
Top