My desktop suddenly will not switch on, the switch goes in and out with no obvious clicks etc, I am assuming the switch initiates an electrical circuit and not a physical switch movement.
I have a pen type tester that detects power in a cable from about 1cm away and it detects power in the cable at the input to the PSU but detects no power in any area of the M/B nor on any of the twenty or so cables that exit the PSU to plug into the various connectors on the M/B
I would appreciate any advice on whether it is likely to be the switch and if it can be either fixed or replaced.
Thanks Boyd (mactoshb)
I have a pen type tester that detects power in a cable from about 1cm away and it detects power in the cable at the input to the PSU but detects no power in any area of the M/B nor on any of the twenty or so cables that exit the PSU to plug into the various connectors on the M/B
I would appreciate any advice on whether it is likely to be the switch and if it can be either fixed or replaced.
Thanks Boyd (mactoshb)