Ds3

liquidshadow

liquidshadow

New Member
Does anyone here have a Gigabyte DS3 board? Do the PCI slots only support PCI 3.3 peripherals?
On the side note, does anyone know how to adjust memory timings in the BIOS? I don't have the options...
 
Last edited:
**I do not have a DS3**

I think you maybe have to hit CTRL + F1, or ALT + F1, something like that maybe? Read on this forum and others, I think it says something about having to hit some combination to access the advanced/OC features. It may have been the ASUS P5B or some other board I was reading about though.

As said, I don't have the board! I'm just speaking hearsay perhaps.
 
Another question, for any DS3 users.....
Are the temps in the BIOS accurate from your experience?
Core Temp is telling me 50C for idle for my e6300 @ 3.2GHZ but I doubt it especially with my Zalman 9500
 
I don't have the DS-3, but I do have the Zalman 9500.
You sure you put it on correctly? Because they should be much lower, considering my 820 is 90nm and idles at 50C as well. Either you put it on wrong or the motherboard sensor is off.
 
I'm guessing totally wrong because BIOS says idle around 30-33C which seems more reasonable since I've only increased coreV by 0.25v on a e6300
 
Last edited:
CoreTemp reads a thermal diode on the CPU die itself, whereas the BIOS reads temps from a diode on the board. CoreTemp should give a higher reading than the BIOS.
 
You must log in or register to reply here.
Back
Top