Dusting out AIO

bigrich0086

bigrich0086

Active Member
Anyone here familair with dusting out an All in one computer.

I recently bought the ZX6971 from Gateway, a 23" AIO Touch Screen

I want to dust it out as house is very dusty, but i can only do so much as the HS exhaust will only blow the dust back into the back of the case.

Are the backs meant to come off fairly easy with taking the screws out or is there more to it.
 
the backs on the all-in-one computers are not easy to come off,they either have screws,clips or both that have to be pryed apart,make sure you are real carefull and check for screws first, and look for a manual on you model
 
The computer is under warranty and i can send it in to be cleaned by them but thats a waste of time and 2 weeks being computerless.

There is 2 screws on the bottom on the back cover. My guess is its held in with lil clips around and the screws hold it in. SHouldnt much harder than changing out LCDs in laptops.
 
sounds about right, there are videos online that show how to remove some backs on diffrent models, some screws and clips,take your time.
 
Ive looked for the videos on removing back covers on AIO but cant find one. Computer is only 3 weeks old. I can see the heat sink from the top vent and dont see dust there yet. SO not in a huge rush to take it apart
 
You must log in or register to reply here.
Back
Top