E6300 Overclock Please Help!

b3atofang3l

b3atofang3l

New Member
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster___________ Turbo
CPU Clock Ratio (Note)____________ 7
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ 450
PCI Express Frequency (Mhz)_______ 100
C.I.A. 2__________________________ [Disabled]
System Memory Multiplier (SPD)____ 2.0
DRAM Timing Selectable_______ SPD __ [Manual]
CAS Latency Time_____________ 5 ____
Dram RAS# to CAS# Delay______ 5 ____
Dram RAS# Precharge Delay_____5 ____
Precharge Delay (tRAS)________15 ____
ACT to ACT Delay (tRRD)_______4 _____
Rank Write to READ Delay______3 _____
Write to Precharge Delay______6 _____
Refresh to ACT Delay________42 ______
Read to Precharge Delay_______4 _____
Memory Performance Enhance__________ [Normal]

High Speed DRAM DLL Settings________ [Option 1]

System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.20V]
PCI-E OverVoltage Control_ [+0.0V]
FSB OverVoltage Control___ [+0.0V]
(G)MCH OverVoltage Control [+0.0V]
CPU Voltage Control_______ 1.325V

Around 3.2 Ghz, with Artic Cooling Freezer Pro 7 idle @ 55, load @ 71-75, new cooler..

what am i doing wrong to get such high temps, can someone help? the computer seems to be stable after 2 hours of dual Prime 95

Thanks

Gigaybte DS3 F12 BIOS
E6300 Conroe
OCZ Platinum Rev. 2 2.2EVP Ram PC2 6400
8800GT EVGA SUperclocked
 
yeah..its securely fastened..it doesn't move when i try to move it..

and yes, it has thermal paste..., it came pre-applied with Artic Cooling Freezer Pro 7, and i heard it was pretty good (from my computer store).

and yes.. my case is open, as we speak.

IS there anything wrong with the way i overclocked???

EDIT: COULD MY CPU BE BROKEN? i remeber when my friend tried to overclock it first time for me, before i knew anything about overclock, it was stable but he had +0.4V for Ram, 1.4500V for Vcore, and +0.3 for MCH.. COULD THAT DAMAGE MY CPU?
 
Last edited:
my standard procedure is to leave the ram untouched completely (meaning speeds, timing and voltages)
first start oc'ing your cpu, if that holds out start with your memory.

for your questions. you can check if its broken by putting all of the settings to default and stress test it with prime95, if that holds out for about 5 hours your probably safe.

increasing the voltage (of the fsb, multiplier or anything that puts more stress on the cpu) does reduce the lifespan of your cpu, but that's normal, riding a bike faster will also wear out the tires faster :P.
 
You must log in or register to reply here.
Back
Top