fan speed?

Yes I believe so, but it says your fan 2 and fan 3 are running at 0 RPM's meaning you've either disabled them, or they are plugged into your PSU not your moterboard. I pretty positive that you can't change the speed unless it is plugged into your motherboard. And not always but most of the time fan 1 is your CPU fan, if you want a little cooler temp, I'd run it at 100%.
 
ya i gor a cpu fan a psu fan a bak 120 mm fan and 2 side fans i think the 2 on the side are th 2 and 3 the 120 came in the case so i guess u cant reallly mess with that
 
but are these plugged in to the motherboard are are they powered straight off the psu?
if they are plugged into the mother board then speed fan is not detecting them, which is weird , maybe you didn't set it up correctly. Take a look in bios and see if you can see the fans speed in there
 
He's probably got them right to the PSU... Or maybe they are cheaper and just don't have the RPM wire :P I have seen some like that...
 
I pretty positive that you can't change the speed unless it is plugged into your motherboard.
Click to expand...
Quite correct :)

some motherboards don't support the speed changing of the fans...
Click to expand...
True but pretty much every single board out there does (to a degree at least) ... due to the standardization of the sensor and control ICs

Or maybe they are cheaper and just don't have the RPM wire
Click to expand...
Bah i hate them 3pin friggen fans ... 4pin molex for me :D
 
You must log in or register to reply here.
Back
Top