fried motherboard on my parents computer what to do with the other parts?

noob89

New Member
i already salvaged the HDD and put it in my computer along with the optical drive, i removed the ram but for some reason it didnt fit and i removed the 250w power supply so right now in my spare parts drawer i have


300w power supply
250w power supply
kynix 512mb ram
celeron D 2.66ghz/256/533
a keyboard
a mouse
some ribbon wire


not much but i dont have anything to do with it any suggestions?
 
Last edited:

K3rupt

New Member
Ok, What kind of ram is it?

DDR= 1 slot in the chips gold plate lookin side
SDRAM=2 Slots

Since you haven Answered the CPU Question, you may not know.

Remove the Heatsink
-Lift the Lock off Chip
-Remove Chip and analyse the top to find what it is.
 
Last edited by a moderator:

noob89

New Member
Ok, What kind of ram is it?

DDR= 1 slot in the chips gold plate lookin side
SDRAM=2 Slots

Since you haven Answered the CPU Question, you may not know.

Remove the Heatsink
-Lift the Lock off Chip
-Remove Chip and analyse the top to find what it is.

its DDR ram and the chip says celeron D 2.66ghz/256/533
 

oscaryu1

VIP Member
Buy another mobo and put all the stuff back on it. Its just the motherboard (unless the CPU was fried too). How did the mobo fry? Surge? That celeron D can b e reused. Or just sell all the spares on ebay and get another computer.
 

treddstone

New Member
You Two. SHUT UP.

LOL.

Seriously, No one cares.

JugHead. Your a N00b. Shh.

Ok, What kind of ram is it?

DDR= 1 slot in the chips gold plate lookin side
SDRAM=2 Slots

Since you haven Answered the CPU Question, you may not know.

Remove the Heatsink
-Lift the Lock off Chip
-Remove Chip and analyse the top to find what it is.

LOL'ed
 

noob89

New Member
would it be possible to make a tazer out of the 2 power supplies? lol any suggestions on what to do with other parts? im thinking about making a oil cooled computer out of my cousins old windows 95 compact lol
 
Top