Going sli tomorow ...

[taylormsj]

A few questions

Is there any special drivers needed to be installed? Or is the current driver i have installed fine.

I have a 4 pin molex connector next to my PCI express slot the manual says i should plug it in to PSU - Is this necessary?

What card do i plug my two monitors into?

Do i have to have my current video card in the first slot (the one its always been in - or can i swap them around

Thats about it ( mostly noob questions, but i d like to get advice from epople who have done it before )

thanks

 

[Impulse666]

generally speaking, if you've got a power plug on your motherboard it should be plugged into the PSU. so yes find a 4pin power for that.

http://www.slizone.com/page/slizone_faq.html
that should answer most of your questions.

since they have to be the same card to be in SLI, you can swap them around as much as you wish.

as for the drivers your motherboard should come with SLI drivers on the disk if you need them.

and you should be able to plug your monitors in a almost any configuration.

 

[kof2000]

drivers needs to be reinstalled even if it is the same version.

plug it into any card you like, once sli enabled you can only use ONE monitor.

 

[Cleric7x9]

you could always buy a third, cheap, PCI card. people who wants SLI and dual monitors have been doing this for a while now