H20 Sli

jutnm

jutnm

Active Member
is there a pre-made part for H2o cooling for these cards im getting ?

http://www.evga.com/products/moreinfo.asp?pn=768-P2-N888-AR&family=23

im new to H2o cooling and afraid ill mess up , tis is the system im getting for the 2 cards im going to run in SLI

http://www.frozencpu.com/products/2...ooling_Kit_Universal_Mount.html?tl=g30c83s137

this is the route - Goes to CPU first> then goes to 1st Card on top> the 2nd card on bottom> then back to pump/ radiator

is there any premade connectors for connecting both cards ?
 
dang :( well its 1/2 so what do i need to connect the two, just tubing , or do i need clamps or somting . help !

oo hey kof, whats the water cooling system u have in ur rig ?
 
Last edited:
I just got that same Swiftech kit. It is actually pretty nice. It pretty much had most of the parts that I wanted anyways. Except I got the chipset block as well.

Those Black Pearls can run on 1/2 inch or 3/8 inch setups so you would be fine with that kit. Yes, you can just attach the tubing onto the waterblocks, but I would highly recommend some type of hose clamps. If you dont have any or cant find any atleast throw on some zipties or something. You can never be too safe with water in your pc.

One thing you might consider, if you have room in your case/outside your case, is getting another radiator and adding that to your setup. That would help keep all of those really hot parts cool.


I dont have my GTS watercooled but if you want to know my loop its:

Res->Pump->CPU waterblock->Chipset block->Radiator->Res

So ya, something like

Res->Pump->gpu1->gpu2->Radiator->res
 
the rad in that kit is weak

get a better one or add one to the loop something like

res->pump->rad->CPU->rad->GPU1->GPU2->res
 
You must log in or register to reply here.
Back
Top