hard disk

X

xantha88

New Member
i have a problem i have a pentium 1 i had a second hardisk instaled but had problems whit it so i took it out but then all the drivers are gone from de cdrom what can i do????????????????????????????????????????????? :(
 
We need a little more information... please check these things.


Is the CDROM drive plugged in?

Does the Eject button work on the CDROM drive?

What IDE Socket is it plugged into.... 0=Primary, 1=Secondary

Is the CDROM drive enabled in BIOS?
 
Scrat said:
We need a little more information... please check these things.


Is the CDROM drive plugged in?

Does the Eject button work on the CDROM drive?

What IDE Socket is it plugged into.... 0=Primary, 1=Secondary

Is the CDROM drive enabled in BIOS?
Click to expand...

windows 98

and 4 scrat
yes
yes
i dont know
yes
 
Last edited:
What is the Jumper on your CDROM Drive and the HDD set to... Master, Cable Select or Slave?

What happens when you put your Windows98 CD into the CDROM Drive?

Open windows Device Manager and check if there is any CDROM drive listed?
Does it have any problems listed?
 
thats the problem i want 2 intal windows 98 but it sáys "no drivers avalibel" and i dont know i know what Master, Cable Select , Slave is but i cant make out what what is (jumpers)
 
At what point during the instalation does it say this.... What else is displayed on the screen when it says "no drivers available".
 
the jumpers are on the back of your hdd and cd drives, they set the drive to master/slave/cable select, the proper settings should be labeled on your drive somewhere. The IDE socket should be labeled on the mobo.
 
thats the problem it says noting cromewell
Click to expand...
Theres only 4 sets of pins. Trial and error will give you the solution. In most drives

Master
[x]xxx
[x]xxx

Slave
x[x]xx
x[x]xx

CS
xx[x]x
xx[x]x
 
You must log in or register to reply here.
Back
Top