Help build my computer

Pc_Pimp

Pc_Pimp

New Member
Can anyone help a first time computer builder? What order to put in and how to test each part if i need to along the build. (basically a how to) , also is everything compatible?

This is what i ordered...

Processor: Intel Pentium D 805 Smithfield 2.66Ghz
Board: Gigabyte GA-965G-DS3
Ram: Corsair XMS2 1GB (2 x 512MB) DDR2 800 (PC2 6400) Dual Channel
Hard drive: Western Digital Caviar 320GB 7200RPM 16MB cache SATA 3.0GB/s
Case: Apevia (Aspire) X-Plorer black/blue steel mid tower atx case
Power Supply: Antec SmartPower 2.0 450watt power supply
Operating system: Microsoft Windows XP Home edition (service pack 2)
1 dvd burner
1 cd drive
1 floppy
 
Last edited:
Does anybody here suggest that i get an anti-static wrist strap? The site that Twix posted says:

Before unpacking your components from its original anti-static bags you must put on your anti-static wrist strap, which will discharge your self. It is important that you discharge yourself or there is a danger that you can damage your components by anti-static shock by touching the components.

I dont wanna ruin any of my parts. So should i get one?
 
Naw, don't bother. Just make sure you touch your case frequently to discharge the static electricity.
 
The motherboard manual will have the install process with it. Take your time if you get stressed go away and have a brew. I found building my dual processor socket monster was better when I installed the processors without the coolers before placing the motherboard in the case. Put the PSU in last as the wires will drive you mad. Anything you think will get in your way put it in last but don't build it all outside the case and expect to fit the motherboard will graphics cards installed into the case. Don't switch on till you have tripple checked it over.
 
You must log in or register to reply here.
Back
Top