Help Overclocking My E6600

[WeatherGeek]

Hey everyone. I've got my my C2D E6600 at 3.3GHz right now, but it only ran for about 12 minutes in orthos before stopping due to an error...
I've upped the voltage 0.0500V from stock with the FSB set at i believe 1465 in BIOS. Those are the only 2 CPU settings I changed, Vcore and FSB...
What should I do next to get a stable higher overclock? The settings in my bios include
CPU Voltage (+0.0500)
FSB VTT ( in a percentage , 2%,4%...)
northbridge Voltage
southbridge voltage

Which of these, or other, settings should I change now and by how much? Thanks

 

[frost02]

if your cpu's multiplier isnt locked you can increase that 1 maybe 2 if you increase your vcore. your fsb is already pretty fast so leave that alone and i'd say 3.3 is pretty good for your processor

dont forget cooling.

another suggestion would be to lower your cpu multiplier and get a faster fsb


im high right now so i dont know if this info is accurate haha

 

[liquidshadow]

His CPU is locked, they've been locked for years and years and years now....
Try increasing the northbridge voltage by .1 or .2 and the MCH by .2. Keep southbridge as it is for now.