MSI K9A2 PLATINUM DDR2 AMD Socket AM2+/AM3 Motherboard SpecificationsCPU
AMD® Phenom/Athlon/Sempron in the Socket AM2+ package.
FSB
HyperTransport 3.0 supporting speed up to 2600MHz
Chipset
AMD® 790FX and SB600 Chipset
Main Memory
Supports Dual DDR II 533/667/800/1066
4 DDRII DIMMs (240pin / 1.8V)
Supports a maximum memory size up to 8GB.
Slots
2 mazarine PCI Express x16 slots (PCI Express Bus SPEC V2.0 compliant; supports CrossFire Technology)
2 light-blue PCI Express x16 slots with x8 operations (PCI Express Bus SPEC V2.0 compliant; supports CrossFire Technology)
When 4 PCI Express x16 slots are all installed, the PCIE x 16 lanes will auto arrange form x16/ x0/ x16/ x0 to x8/ x8/ x8/ x8
1 PCI Express x1 slots
2 PCI slots, support 3.3V/ 5V PCI bus Interface.
On-Board IDE
One IDE port by AMD® SB600
Supports Ultra DMA 66/100/133 mode
Supports PIO, Bus Master operation mode
Can connect up to two IDE devices
On-Board SATA
4 SATA II (1~4) ports by AMD® SB600
2 SATA II (5~6) ports by Promise® T3, support SAS ready devices, for storage devices only
2 eSATA ports by Promise® T3, for storage devices only
Supports storage and data transfers at up to 300 MB/s
RAID Function
SATA II 1~4 support RAID 0, 1 and 0+1 mode by AMD® SB600
SATA II 5~6 & 2 eSATA ports support RAID 0, 1 and 0+1 mode by Promise® T3
RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.
Audio
Chipset integrated by Realtek® ALC888/ALC888T
Flexible 8-channel audio with jack sensing
Compliant with Azalia 1.0 Spec
LAN
Realtek PCI-E GbLAN controller 8111B
Integrated Fast Ethernet MAC and PHY in single chip
Supports 10Mb/s, 100Mb/s and 1000Mb/s
Compliance with PCI-Express Bus specification v1.0a
IEEE1394
Chipset integrated by VIA® VT6308P
Transfer rate is up to 400Mbps
Internal I/O Connectors
ATX 24-pin power connector
ATX 4-pin 12V CPU power connector
ATX 4-pin VGA power connector
CPU / System x 4 FAN connectors
CD-in connector
Front panel audio connector
Front panel connector
3 x USB 2.0 connector support additional 6 ports
1 x Floppy disk drive connector
6 x Serial ATA II connectors
1 x ATA133 HD connectors
1 x SPDIF-out header
1 x IEEE1394 connector support additional 1 ports (optional)
1 x Serial port header (optional)
1 x VoIP card header (optional)
1 x floppy disk cable (optional)
Back Panel I/O Ports
1 x PS/2 keyboard
1 x PS/2 mouse
1 x Optical SPDIF out
1 x IEEE1394 Port (optional)
1 x 6 in 1 audio jack
4 x USB 2.0 ports
1 x RJ45 LAN jack
2 x eSATA ports
Dimension
30.5cm(L) x 24.5cm(W) ATX Form Factor
Mounting
9 mounting holes.
Includes
IDE cable
2 x SATA power cable
4 x SATA cable
1 x IEEE1394 bracket
1 x eSATA to SATA cable
my ram is pc2 8500 cross fire certified [email protected] 1066mz all same ram i shut down computer install first stick boot up runs good shut down install #2 stick boots up runs good shut down and install #3 stick boot back up whean windows start screen comes up crass blue screen comes up wath lots of Numbers and a memory dump thins trys to re boot now i did nowtus when i install the two sticks in the same cooler slots it wont do nothing but can install them side by side and two will run good
yes my cpu is a Phenoms 2 x4 no dont know if i can up the volteg