How to store thermal paste?

The VCR King

The VCR King

Well-Known Member
I still have nearly the entire syringe of thermal paste left from when I got my Zalman installed. I have it back in it's package with the cap on it but I was wondering if there's any other precautions to take when storing thermal paste, because I'd like to preserve it for use in building future rigs in the upcoming years. :)
 
I had a tube of normal Arctic Silver 5 that lasted me 2-3 years of several uses. Just put the cap on it and you're fine.
 
voyagerfan99 said:
Doesn't matter. As long as it stays capped it won't dry out.
Click to expand...
Darren said:
I had a tube of normal Arctic Silver 5 that lasted me 2-3 years of several uses. Just put the cap on it and you're fine.
Click to expand...
Ok. Just making sure I was doing it right. Thanks!

Laquer Head said:
Exactly!

That's why I laugh at people that put globs of paste on and burn through tubes way too fast
Click to expand...
The guy at MicroCenter used a very small amount. My tube is still pretty much full. The old paste that was scraped off the CPU was such a small amount it was like paper thin.

Darren said:
Too much thermal paste acts as an insulator too.
Click to expand...
I never knew that. I actually used to think more = better but appearantly not. LOL!
 
The VCR King said:
Ok. Just making sure I was doing it right. Thanks!


The guy at MicroCenter used a very small amount. My tube is still pretty much full. The old paste that was scraped off the CPU was such a small amount it was like paper thin.


I never knew that. I actually used to think more = better but appearantly not. LOL!
Click to expand...

You basically want enough to provide a thing coating across the entire top of the processor. Just a little bit in the middle and the pressure and heat will even it out as needed. The majority of the heat comes from the center of the chip so it's not 100% critical to get it all the way to the corners.

 
Darren said:
You basically want enough to provide a thing coating across the entire top of the processor. Just a little bit in the middle and the pressure and heat will even it out as needed. The majority of the heat comes from the center of the chip so it's not 100% critical to get it all the way to the corners.

Click to expand...
I had MicroCenter use the paste that came with my cooler, Zalman brand, and my PC never goes above 25C under load and it idles around 19-20C.
 
The VCR King said:
I had MicroCenter use the paste that came with my cooler, Zalman brand, and my PC never goes above 25C under load and it idles around 19-20C.
Click to expand...

Considering 25oC is 77 Fahrenheit, and hardly above room temperature. I really really doubt that... My Phenom II idled above 30oC usually.
 
I just apply a small pea-sized blob of paste directly in the centre of the CPU and then install the cooler. A tube of thermal paste should last you a long time. You should only use a small amount each time. Too much and it won't help to keep your temperatures down.
 
Darren said:
Considering 25oC is 77 Fahrenheit, and hardly above room temperature. I really really doubt that... My Phenom II idled above 30oC usually.
Click to expand...
My office never goes above 60 degrees. Any more and I feel hot, LOL. In the winter time our furnace failed and the temp in the room was like 40 and my PC said 15C.
 
Darren said:
You basically want enough to provide a thing coating across the entire top of the processor. Just a little bit in the middle and the pressure and heat will even it out as needed. The majority of the heat comes from the center of the chip so it's not 100% critical to get it all the way to the corners.

Click to expand...
Great Video..
 
spirit said:
I just apply a small pea-sized blob of paste directly in the centre of the CPU and then install the cooler. A tube of thermal paste should last you a long time. You should only use a small amount each time. Too much and it won't help to keep your temperatures down.
Click to expand...

And remember to take the cap off first ;)

In all fairness, I have a syringe that is probably 5 or 6 years old nearly knocking about still, I didn't think they did degrade over time :3
 
You must log in or register to reply here.
Back
Top