I need help with ram lol

P

pyro

New Member
Ok right now my motherboard can take PC2100, PC2700, and PC3200. I have a stick of 256 PC2100. And I just orderd a stick of 512 PC3200. If I used them together, would it cause any damage?
 
No but it would run slower than the speed indicated, did you check if your mobo isn't picky about voltages and timings?
 
Normally it comes with the manual of the mobo or if you bought it from some site, the site will probably tell if it's picky
 
Umm...Ok thanks alot :). Because I'm cahnging my motherboard + cpu to a faster speed, and I needed new ram for the motherboard I wanna get. But until I get them I'm going to use the ram I just ordered in this motherboard
 
Processor: Supports compatible AMD Socket A (462) processors
Please see our "CPU Compatibility" listing
Chipset: SiS748 + 964L
Front Side Bus: 200/266/333/400 MHz
Memory: DDR266/333/DDR400 x 3
VGA on Die: N/A
Expansion Slots: 1x AGP 8X (1.5v only), 5x PCI, 1x CNR
IDE: ATA133 x 2
Serial ATA(SATA)/RAID: N/A
Audio: Realtek ALC655 5.1 channel, AC97 2.3
LAN: IC Plus IP101 (transformer on board)
IEEE1394: N/A
Back Panel I/O Ports: 1 x PS/2 keyboard
1 x line-in / line-out / MIC ports
1 x PS/2 mouse
1 x SPDIF
1 x Parallel 4 x USB
1 x COM
1 x RJ45 LAN port
Internal I/O Connectors: 2 x USB 2.0 headers, support 4 ports
S/PDIF header
CD IN header
BIOS Features: 2Mb ISA interface
Support CD: English/Simple Chinese, Drivers, Utilities, Adobe Reader 6.0, Direct X9.0B
Standards/Manageability: PCI 2.3, USB2.0, WfM 2.0, DMI 2.0, WOL by PME, LPC 1.1 Interface, PC2001
Special Features: Support SuperBoot, SuperBIOS-Protect, support SuperLogo, SuperUpdate, SuperStep, overclocking
Form Factor: ATX (11.6” x 8.0”)

My motherboard specs....How do I tell if it's picky?
 
Hmm what's the brand of the mobo? i don't really think you will have any problems but in any case is better to check deeply
 
You must log in or register to reply here.
Back
Top