khalid1987
New Member
Hello everyone,
Since i am going to have a GPU water block upgrade to my thermaltake 760i LC system, i decided to throw in an additional radiator and that is the Thermaltake TMG1 (120mm radiator), to handle the heat flow from the CPU and the graphhics card. The following would be the flow for the system ( i just want to make sure it is correct):
1-from 760i LCS to CPU waterblock 2- CPU waterblock to TMG1 (i want the water to chill before entering GPU) 3- From TMG1 to GPU water block for ATI HD 4850 x2. 4- From GPU water block back to 760i radiator.
First i just want to make sure that this would be the correct flow sequence. The other i found this GPU water block which is actually for ATI HD 4870 x2 but i think the socket size for 4850 and 4870 are the same
This is the GPU block i want to get, Swiftech Caldera 4870X2 Full Coverage VGA Liquid Cooling System (CALDERA-4870X2)
http://www.frozencpu.com/products/8...ing_System_CALDERA-4870X2.html?tl=g30c309s787
In additional to this water block, if it is compatible, what fittings should i buy. I have 3/8 in tubing. Would the Thermaltake iConnect 69 be good to connect the tubes with this GPU waterblock?
I apologize for the thread being long. I tried to make it as short as possible
Best,
Khalid
Since i am going to have a GPU water block upgrade to my thermaltake 760i LC system, i decided to throw in an additional radiator and that is the Thermaltake TMG1 (120mm radiator), to handle the heat flow from the CPU and the graphhics card. The following would be the flow for the system ( i just want to make sure it is correct):
1-from 760i LCS to CPU waterblock 2- CPU waterblock to TMG1 (i want the water to chill before entering GPU) 3- From TMG1 to GPU water block for ATI HD 4850 x2. 4- From GPU water block back to 760i radiator.
First i just want to make sure that this would be the correct flow sequence. The other i found this GPU water block which is actually for ATI HD 4870 x2 but i think the socket size for 4850 and 4870 are the same
This is the GPU block i want to get, Swiftech Caldera 4870X2 Full Coverage VGA Liquid Cooling System (CALDERA-4870X2)
http://www.frozencpu.com/products/8...ing_System_CALDERA-4870X2.html?tl=g30c309s787
In additional to this water block, if it is compatible, what fittings should i buy. I have 3/8 in tubing. Would the Thermaltake iConnect 69 be good to connect the tubes with this GPU waterblock?
I apologize for the thread being long. I tried to make it as short as possible
Best,
Khalid
