Is this a good enough PSU to power the 7800gtx well?

[liquidshadow]

Ultra 600 watt ATX Power Supply

Max Output Current
+5v | +3.3v | +12v | -5v | -12v | +5VSB
28A | 28A | 29A | 0.6A | 0.6A | 2A

Total Output Power
600W (Full Load, Nominal Input Voltage)
Efficiency
70% Typical at Full Load and Nominal Input Voltage

 

[mrjack]

I think so, but wait for others to post their replys too...

 

[liquidshadow]

ok thanks mrjack

 

[Archangel]

itll do just fine 29Amp on th +12V can even Run a SLI 7800GTX setup

 

[liquidshadow]

thanks for the help archangel!

 

[Calibretto]

As the sticky says, Wattage doesn't mean jack. You want at least 24A on the 12V rail. But yours look ok to me.

 

[diduknowthat]

what brand is it?

 

[Archangel]

the brand is called "ultra"
http://hi-techreviews.com/nuke/ultra600/ultra600_page1.htm

 

[liquidshadow]

i've got a question.
if it says like 12v and 12v with a small 2 on the bottom right of it, what does it mean? And how do you figure out the amount of amps on the ?dual? 12v rails?

 

[Archangel]

usually the 2 12V rails are the same amperage

 

[Ku-sama]

Same PSU i have... Gets the job done better then Rambo ever has

 

[liquidshadow]

So if the two 12v rails have the same amp, do you add them up to get the total amount of amps on the 12v rail?? so 12v(1) with 18amp and 12v(2) with 18amp would be the same as a single 12v rail with 36amps??

 

[Archangel]

yes

 

[liquidshadow]

thank you arch