Liquid Cooling Case Help

[CaptainAwesom]

Sorry, I the name doesn't exactly fit this at all(I edited it). I actually need suggestions about a mid-tower case that I can use to keep all of my components cool. I need a case with alot of fans and I need some suggestions of how to keep all of my parts very cool.

 

[Geoff]

So you are just looking for a case with lots of case fans? The Antec 900 may be what you are interested in, it has two 120mm fans in the front, one 120mm fan on the back (in addition to the PSU fan), a 250mm fan on the top, and a side vent which could be modded for another 120mm fan.

 

[CaptainAwesom]

thanks i'll look into it

 

[ducis]

So you are just looking for a case with lots of case fans? The Antec 900 may be what you are interested in, it has two 120mm fans in the front, one 120mm fan on the back (in addition to the PSU fan), a 250mm fan on the top, and a side vent which could be modded for another 120mm fan.

Are you serious the antec 900 is absolute hell to liquid cool
Try something like to p180 because it has alot more flat exposed metal to place a rad on

 

[Cleric7x9]

Are you serious the antec 900 is absolute hell to liquid cool
Try something like to p180 because it has alot more flat exposed metal to place a rad on

if you read the post you can see that he wasnt necessarily talking about liquid cooling, he said he wants something with a lot of fans...

 

[ducis]

if you read the post you can see that he wasnt necessarily talking about liquid cooling, he said he wants something with a lot of fans...

From reading both the title and the post i found that he wanted a mid tower case that he could liquid cool and would have lots of fans the 900 has lots of fans but takes alot of skill to liquid cool

 

[CaptainAwesom]

no sorry about the name of the thread I initially wanted a case that can be easily liquid cooed case but then my friend(who is helping me to assemble this computer) said liquid cooling would not be worth it for what I am doing so i edited it and wanted a non liquid cooled case with a bunch of fans


Sorry for any confusion I have caused

 

[ducis]

no sorry about the name of the thread I initially wanted a case that can be easily liquid cooed case but then my friend(who is helping me to assemble this computer) said liquid cooling would not be worth it for what I am doing so i edited it and wanted a non liquid cooled case with a bunch of fans


Sorry for any confusion I have caused

s'ok in that case the any 900 is a good case, but tell your friend he's wrong

 

[Geoff]

Are you serious the antec 900 is absolute hell to liquid cool
Try something like to p180 because it has alot more flat exposed metal to place a rad on

First, he said he wanted a case that had good potential for air cooling. Besides, I had my water cooling setup perfectly fine in my 900, the only hard part was mounting the pump because the PSU is on the bottom.