memory OC

Shane

Shane

Super Moderator
Staff member
Hey guys,

im trying to set my ram at over 800Mhz,i have had it at 824mhz before with my e6300 at 2.7ghz but i forgot how the heck i did it:confused:

if i go in the bios and set it AUTO it goes streight to 926Mhz which is no good obviuly because it wont boot.

if i set it to 1:1.00 it runs at 772Mhz but if i set it to anything else the memory goes over 1000Mhz which is again no good.

please keep in mind i have 2x 1Gb pc5300 and 2x 2x 512mb pc6400.

my cpu settings

CPU FSB: 386
X7
= 2702Mhz

what do i do? im looking to boost my system
 
Last edited:
1:25 it runs at 965Mhz

1:50 runs ar 1158mhz

they are far too high and it wouldnt boot

the lowest i could go it 1:20 which is 926mhz?


i wish i could remember how i got it to 824mhz :confused:
 
Nevakonaza said:
1:25 it runs at 965Mhz

1:50 runs ar 1158mhz

they are far too high and it wouldnt boot

the lowest i could go it 1:20 which is 926mhz?


i wish i could remember how i got it to 824mhz :confused:
Click to expand...

Do you have the ability to type in the speed of your memory, I know some boards can do that...
 
nope i cant see anything like that,i can ither change the timings like the above.

heres what its at now:
PIC_0037.jpg



i noticed this setting called "Advanced DRAM timing by speed...its disabled but i can enable it.

PIC_0039.jpg


not sure what it does :D :confused:

sorry about teh flash....i cant figure this camera out its pathetic :mad:
 
it probably wouldnt work, but if you could raise your timings way up and then maybe, just maybe your ram could do it? also i would change the voltage of the ram if you havent already, stock voltage is hardly enough for overclocking.
 
You must log in or register to reply here.
Back
Top