Motherboard beep problem. Plz help me!!

T

TLF

New Member
Hi!

I was just done building my computer. And when i now start the copmuter the motherboard beeps normaly first. And then a really long beep that never stops. Everything in the computer is running normally. can you guys plz help me?? Really need help?
 
Does it give you any errors at POST (when the computer is listing all of your hardware)?
So it does turn on and boot to your OS?
 
Make sure you have the CPU power connector in 4/8 pin. Reseat all the cards. Did you put all the standoffs under the board in the right places?
 
aviation_man said:
Does it give you any errors at POST (when the computer is listing all of your hardware)?
So it does turn on and boot to your OS?
Click to expand...

I havent tried to boot so far to OS. But no errors at POST. Is it dangerous to boot to OS if it sounds like that?
 
The beep continues as long as the computer is on?? I would recheck all connectors and cards. Also make sure you dont have something plugged into the wrong slot/socket. Do you have anything plugged into your PCI slots? Are they universal??
 
TLF said:
I´m a kinda half-noob. Soo can you explaine little more detailed for me xD plz :D
Click to expand...

The 4/8 pin CPU connector is what gives you processor power, it should be located near the heat sink.
That's the motherboard standoff
image004.jpg
 
aviation_man said:
The 4/8 pin CPU connector is what gives you processor power, it should be located near the heat sink.
That's the motherboard standoff
image004.jpg
Click to expand...

I dont use standoffs. Is that the problem??
But the cpu fan connector doesn't work. I use an other one??
 
E Money said:
The beep continues as long as the computer is on?? I would recheck all connectors and cards. Also make sure you dont have something plugged into the wrong slot/socket. Do you have anything plugged into your PCI slots? Are they universal??
Click to expand...

Ye, i think so. But i havent try to boot to OS so i dont know but...

I've checked all cards and all that. But i have a nvidia 9600 msi gt in the psi-e slot.
 
Okaj, now i've tryid to boot to OS. And that actually works. But i still think that the beep isn't normal xD
 
TLF said:
I dont use standoffs. Is that the problem??
But the cpu fan connector doesn't work. I use an other one??
Click to expand...

TLF said:
Okaj, now i've tryid to boot to OS. And that actually works. But i still think that the beep isn't normal xD
Click to expand...

If your board tray doesnt have builtin risers you have to use standoffs under your board to keep it from shorting out against the motherboard tray. You only put them under the screw holes that have grounding strips around them.

I suprised it starts at all, or hasnt burned the board up.
 
StrangleHold said:
If your board tray doesnt have builtin risers you have to use standoffs under your board to keep it from shorting out against the motherboard tray. You only put them under the screw holes that have grounding strips around them.

I suprised it starts at all, or hasnt burned the board up.
Click to expand...

haha, thx. Now i found a soution for everything. Now i use standoffd xD But it stilled beeped. But i went in to BIOS and reset all. Then it worked. But thanks for everything :D
 
You must log in or register to reply here.
Back
Top