This is the system in my sig. The mobo has a 610i chipset. I set the Memory and CPU to "unlinked" in the bios. Then I set the frequency to 266MHz. Default was 200MHz x 9 = 1.8GHz stock core clock, rated FSB of 800MHz.
The RAM is at stock settings.
At 266MHz the FSB is 1066MHz and the core clock is 2.4GHz (at 9x, I left the C1E on).
Is this all correct? What should I do to check stability?
The core temps are off by -15ºC. TMPIN0 is the processor, and TMPIN1 is the NB. FANIN1 is the CPU fan.
the 12V is an inaccurate reading, reads 12V in bios.
The RAM is at stock settings.
At 266MHz the FSB is 1066MHz and the core clock is 2.4GHz (at 9x, I left the C1E on).
Is this all correct? What should I do to check stability?
The core temps are off by -15ºC. TMPIN0 is the processor, and TMPIN1 is the NB. FANIN1 is the CPU fan.
the 12V is an inaccurate reading, reads 12V in bios.