NEED HELP QUICK w/ VC!

[iNjEcTeD[50]]

Ok, i just bought 512 of ram and added it to my already 512 and my computer recognizes and accepts it. Now, i opened my computer, took out my 64mb integrated graphics card and put in my new ATI Radeon X1300 PRO into the AGP slot and put my monitor cable back into the normal hole i had it in when i had the old graphics card and when i booted up the screen was blank like it wasnt connected and then i plugged it into the new 1300 and the screen just turned white. The old graphics card was plugged in with NO plugs but the new card came a plug and i didn't connect it but then i tried to connect it and the little part goes on the card and the one big one connects to the power one but it says the other is suppose to go to the hard drive and the one coming out of the hard drive is female plug and so is the one on the wire. What do i do?

 

[diduknowthat]

are you sure its the little one that goes on the card? I've never seen the little connector, but then again i've never dealt with the newer cards. For it to work, you would have to plug it both of the 4-pin molex into the ones coming out of your psu. And btw, punctuations would help alot =).

 

[iNjEcTeD[50]]

Yeah, i had to use the plugs it came with. The little tiny connector hooked to the VC and then there is 2 female plugs in the computer but both are connected. I don't think it makes a difference because i just chose one and plugged it in and the card works. The second plug is just there for other things like a cooler to be plugged in... i thought it NEEDED to be plugged in by my card is working and it's not.

Yeah, i was in a rush when i typed the first post.