NESS D8XD alarm system deault ip address confusion

zillah

Member
Dear folks

NESS D8XD alarm system installed on a business for my friend and a technician who installed it he said he didn't change the alarm system default ip address.

http://nesscorporation.com/ness-security/ness-control-panels/home-security/k-6308.html

Default ip is 192.168.0.251 ,,,as per the advise of their National Customer Service Centre,,,I called them and spoke with them

The confusing part I can ping this ip address (192.168.0.251) but it is neither in the list of the attached wired devices nor in the list of attached wireless devices (any way NESS is a wired box)

Snapshot below is for the attached wired devices :

https://imgur.com/a/GPvm98R

And the ping result is below :

Code:
C:\WINDOWS\System32>ping 192.168.0.251
Pinging 192.168.0.251 with 32 bytes of data:
Reply from 192.168.0.251: bytes=32 time=6ms TTL=64
Reply from 192.168.0.251: bytes=32 time=2ms TTL=64
Reply from 192.168.0.251: bytes=32 time=3ms TTL=64
Reply from 192.168.0.251: bytes=32 time=4ms TTL=64
Ping statistics for 192.168.0.251:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 2ms, Maximum = 6ms, Average = 3ms

Confusion how can I ping the ip address and it is not listed in my router table ???

Thanks
 

zillah

Member
Credit to billaustin from dslreports.com

The DHCP for the router was between 192.168.0.220 and 254 means that range includes the alarm static address which is .251

I changed the range to be from 192.168.0.205 and 249 ,,,,and now I can see the static ip address 192.168.0.251 (second entry from the top) in the list

https://imgur.com/a/lonmnzb
 
Top