New computer cant boot (assuming ram error)

[Beske]

Hello.

So i just build my new computer with the following spec's:

Mobo: ASUS Sabertooth P67

CPU : Intel Core i7-2600K

GPU : Gainward GeForce GTX 580

Case : Fractal Design Define R3

RAM : Corsair Vengeance 8gb 1866

HDD : Samsung SpinPoint F3 1TB

PSU : Corsair TX V2 850W PSU

So, after connecting everything, and starting the computer for the first time.

All the fans starts spinning, cpu led gives a short flash and that is followed by the RAM led doing the same thing. Afterwards the VGA led starts having constant light, and of course nothing pops up at the screen, and a while after the boot device led starts having a constant light too.

So. untill now i have tried with 1 ram in all different sockets, tried moving the GPU. Tried removing the GPU and only having RAM + CPU connected to the mobo (all fans, HDD and everything unplugged) and that still gave me the same VGA light.

Tried the "jumper" to reset, so far nothing worked.

But, the last thing i tried, was having everything plugged in EXCEPT ram. And that leaves me No Vga or boot device led. But of course the RAM led lights (Due to not having any ram inserted)

So......... Am i right if i say that the memory got an error?

Hope you can help me.

//Beske

 

[NyxCharon]

This might be of some use to you. Always helps me in a situation like this.
(click for the full view)

 

[Beske]

So. i just took some RAM that i know works from my fathers computer, and that makes the same error as the vengeance ram so i have no clue what is wrong now.

 

[Troncoso]

Don't make 2 threads for the same thing mate. We will help you figure it out in the other one.