New Gaming Rig...

Sedah

Sedah

New Member
Hey, everyone, jus wanted to say thanks for those who helped me w/ questions prior to the build and those who gave me advice on parts.

My case finally came in yesterday, and was the last thing I ordered. I assembled it right away when i got it and got everything working in 8-9hours or so; now only thing I need to upgrade is the cooling kit for the CPU[using stock for now] Idle wise it stays at 33-37c and workload gets to 38-42c...sooo lookin to OC it to around 3.3-3.7ghz; got any aftermarket cooling kit suggestion? =)

anyways, jus wanted to share the finish product...the specs are listed below.

04132009.jpg
 
Last edited:
Sedah said:
Hey, everyone, jus wanted to say thanks for those who helped me w/ questions prior to the build and those who gave me advice on parts.

My case finally came in yesterday, and was the last thing I ordered. I assembled it right away when i got it and got everything working in 8-9hours or so; now only thing I need to upgrade is the cooling kit for the CPU[using stock for now] Idle wise it stays at 33-37c and workload gets to 38-42c...sooo lookin to OC it to around 3.3-3.7ghz; got any aftermarket cooling kit suggestion? =)

anyways, jus wanted to share the finish product...the specs are listed below.

04132009.jpg
Click to expand...

Very nice! You have pretty much the same build I want to do. How well does the GTX 260 fit in your case? Also do you think you might go SLI in the future?
 
leopardforest said:
Very nice! You have pretty much the same build I want to do. How well does the GTX 260 fit in your case? Also do you think you might go SLI in the future?
Click to expand...

heres how it looks on the inside if this helps you..

DSC_0166.jpg

DSC_0167.jpg

DSC_0168.jpg

DSC_0169.jpg


AND; yes, I do plan on doin SLI in the near future, and should be gettin my aftermarket cooler sometime nex week.
 
Last edited:
Oh how I love my case.
I can have my PSU facing the right side up while mounted
on the bottom, because the bottom of my case is vented,
so it pulls cool air from outside, rather than warm air from
inside the case.


Nice build though.
 
Bodaggit23 said:
Oh how I love my case.
I can have my PSU facing the right side up while mounted
on the bottom, because the bottom of my case is vented,
so it pulls cool air from outside, rather than warm air from
inside the case.


Nice build though.
Click to expand...

thanks, I wanted to make a hole on the bottom of the case for the PSU fan itself, but had no idea how to do it, so jus left it as is.
 
i would rather a full tower for i7 much more room and airy.Anyways works for you and looks good too.. So njoy your new i7 pc
 
You must log in or register to reply here.
Back
Top