New hardware won't post

Wihannes

Wihannes

New Member
Hey!

I'm asking for a little help here, because i assembled my new machine from the components that i just bought... And also my bigger brother is completelly clueless.

Case: NZXT Hush Silent
PSU: Corsair 750TX 750W
MoBo: MSI K9A CF-F, AMD 790FX
CPU: AMD Phenom II 940 Black Edition 3.0GHz 8Mb
CPUcooler: Coolink Silentator AM2
RAM: 2 x 2Gb Mushking SP-6400 800MHz (5-5-5-18)
HDD: 1Tb Seagate Barracuda 3,5" 7200rpm
Video: GainWard Radeon HD 4870 1Gb GDDR5 Golden Sample
Else: LG DVD+/-RW DL 22x SATA


I have checked every possible problem that i know and have googled some info too. Still nothing, i also took it apart and reassembled it again but still nothing???

PS. It doesn't even give any beeps when trying to boot it? And yes the SPEAKER pins are fine.


Please, If you know something could you hjalp meh plx :cool:
 
I'm gonna reassemble it from scratch when i have the time...

But the components are compitable with eachother, right?



PS. That link's manual was for platinum edition, and i have my own one that came with the mobo. Thanks for your help anyways... u just wanted to helpz :D
 
Are you getting power lights? Did you plug in 20+4 pin connector completely? Is power plugged into CPU connection on motherboard? Are fans turning? Is RAM seated correctly?
 
Just to make sure, is that motherboard a KA9 or KA92? The parts you have listed look compatible. You may have a dead board.
 
- Yes the the power pins are plugged in the mobo and it sounds liek it's bootin' up but it won't show any effect on the screen or any error beeps. The case lights turn on just like normally too.

- And yes, it's a K9A2 CF with AMD 790X Motherboard

I will try to reassemble it tomorrow and if still nothing i will contact the retailer for a new board if possible.


Tyvm for helpzor :cool:
 
You must log in or register to reply here.
Back
Top