shelldan
New Member
Hi
Ive recently built a computer.
Here are the specs
PSU - Enermax EG701AX-VE 600w Noiosetaker
MOBO - Asus M2N-SLI Delux Socet AM2
CPU - AMD Athlon64 x2 Dual Core 4200+
Memory - 2GB DDR2 800 PC6400 SDRAM
Sound - X-Fi
Graphics - 2x MSI NX7600GS Geforce 16x SLI Video Cards
Now Ive hooked all this up and it all runs sweet.
The problem I have is when I connect power to my hard drive unit its like there is not sufficent power to run it. All I get is a small surge of power running through to light up the fans and it shuts down. Once I disconnect the hard drive it runs sweet so Ive narrowed it down to the hard drive.
Can anyone tell me what is going on.
My hard drive is a Seagate Barracuda 7200.9 Sata 2 300GB
Ive tried using the sata2 connectors from the PSU but to no avail and I have also used a sata2 to molex connector cable to see if that works but to no avail also.
Any help would be much appreciated. Thanks
Ive recently built a computer.
Here are the specs
PSU - Enermax EG701AX-VE 600w Noiosetaker
MOBO - Asus M2N-SLI Delux Socet AM2
CPU - AMD Athlon64 x2 Dual Core 4200+
Memory - 2GB DDR2 800 PC6400 SDRAM
Sound - X-Fi
Graphics - 2x MSI NX7600GS Geforce 16x SLI Video Cards
Now Ive hooked all this up and it all runs sweet.
The problem I have is when I connect power to my hard drive unit its like there is not sufficent power to run it. All I get is a small surge of power running through to light up the fans and it shuts down. Once I disconnect the hard drive it runs sweet so Ive narrowed it down to the hard drive.
Can anyone tell me what is going on.
My hard drive is a Seagate Barracuda 7200.9 Sata 2 300GB
Ive tried using the sata2 connectors from the PSU but to no avail and I have also used a sata2 to molex connector cable to see if that works but to no avail also.
Any help would be much appreciated. Thanks