oc help

sokol

sokol

New Member
Hi I had my computer stable at 445 x9 1.312v and ram timing 5-5-5-12 at 2.050v and now I bought 2 more gigs of ram and installed them and tried running orthos at the same settings as before and it gets errors. I tried almost everything to get the pc stable running orthos at least for 10 sec or more but nothing. Can anyone help me.
 
Well, maybe the new RAM just simply can't cope with your OC and timings... are teh RAM modules identical? I take it you're OCing the rig in your sig? What frequency is your RAM running at? I'd probably start off by loosening timings and/or running the RAM a little slower, to see if the RAM really is the problem.
 
Ok i went back to 2 gigs and same settings like I had and its stable but with 4 gigs I cant get the system to be stable I run orthos and after 3 sec I get error anyone know what settings I should set them to.
 
Sometimes the sheer number of memory sticks can cause problems - even if they all handle the same OC w/o problems, having them all working together may require you to loosen on the timings and/or clockspeed.
 
You must log in or register to reply here.
Back
Top