ok firing up my new build

musso

New Member
i need some help with this i got it all together and don't want to burn it up so i don't know what to do first. i have not turned it on yet. i have all the disks os,mother board disk,gpu disk. what do i start with first. i would assume the os but i don't know and don't want to assume.

thank you
musso
 
is it all together? if it is boot into bios and make sure cd is first to be booted then insert the os cd and install it
 
my suggestion to you is to go over everything and make sure you havent missed any connectors( usually you find out about that later ) and boot to BIOS to select your cd/dvd drive as number one in the boot order. then boot your OS, make a partition for the OS and one for storage (keeping the two seperate means if you have to kill your system you still have all your stuff).
 
i can't get it to boot to the CD ROM iv went in to the bios and made the CD ROM #1 and it keeps going to the bios screen. it sees both of the hard drives in the bios and when it starts up it says no physical drives and local drives but there seen in the bios. any idea.

thank you
musso
 
i got it i was two impatient and did not Wait for the OS to start. but i got it. i have one other prob. i have 2 hard drives and only 1 shows up when i look in my computer. and they both shows up on the hardware manger but not in my computer.

thank you for the help
musso
 
Last edited:
Back
Top