Omg Noo!!! It Can't Be!!! Not Again...this Times Worse!!! Why Oh Why Me!?

[Rambo]

I changed those power managements when I first updated to F10 (that's when they were available). Didn't see a difference, so I left them on.

Yeah, try fail-safe defaults. Then change to the settings I posted above. Go up in 30's/40's until you reach 350 Mhz. Then go up in 10's/20's. But you'll be fine...

 

[ADE]

YORECA!!! SETTING TO FAIL SAFE WORKED! NO MORE POSTING PROBLUM!!! YAYAYAYAYAYAYAYAYAYAYAYAYAYAYYYAYAYAYAYAYAYAYAYAYAYAY ETC. Now to overclock.

 

[ADE]

Hmm....that's odd...When ever I try to OC now it wont post then I shut off turn on and all is well but it resets everything back to stock...any suggestions?

 

[ADE]

I reset the timings to the RAM back to auto and it fixed it. Rambo, the RAM timing you gave me are the stock timings of my RAM only the Precharge Delat (tRAS) is 18 instead of 15. I think that is the problem.

 

[Rambo]

I reset the timings to the RAM back to auto and it fixed it. Rambo, the RAM timing you gave me are the stock timings of my RAM only the Precharge Delat (tRAS) is 18 instead of 15. I think that is the problem.

Ok, so set it to 18 then.

How is it overclocking? Better? Worse? Same?

 

[ADE]

EXTREMLY STABLE!!! I FIGURED OUT WHAT CAUSED THE POSTING PROBLUM FOR SURE NOW! I never dared try but when I saw you upped the voltage to the MCH thing it always posts! I'm at 2.55GHz now and still going! I have very extensive data i will post later to show what I originally did. I'll let you know how things go.

 

[ADE]

I'm at 2.75GHz with no problems. Hay Rambo, what are your idle and full load temperatures? At this speed my idle is 51C and my 67C full load. is that good or should I be worried?

 

[kof2000]

you should never go over 60c load unless you are not running it 24/7... thats a little too hot... are you using stock cooling and as5?

this is mines on the stock intel cooler... nice stock cooler btw not intended if you planned on going pass 3ghz though...

lol nevermind i just saw you are using a 6300 probably need stock cooled lol

 

[ADE]

I'm using a thermaltake Big Typhoon with Arctic silver 5.

Edit- Oh wait wtf? TAT says 52C idle, PC wizard says 41C....TAT must be wrong then....

 

[joeswm8]

big typhoon and you are at 51 idle?

thats B.S. and your OC isnt super high at all.

those temps are way to high and bad by the way

 

[ADE]

I said 42 Idle. there's an edit.

 

[Rambo]

EXTREMLY STABLE!!! I FIGURED OUT WHAT CAUSED THE POSTING PROBLUM FOR SURE NOW! I never dared try but when I saw you upped the voltage to the MCH thing it always posts! I'm at 2.55GHz now and still going! I have very extensive data i will post later to show what I originally did. I'll let you know how things go.

Oh, you are joking?!? That is one of the single most important things to do when overclocking on this board!! I'm sure I've said that multiple times on this forum...

http://www.computerforum.com/70708-e6300-oc-only-up-2387mhz-need-advice-2.html#post546163

http://www.computerforum.com/65895-i-am-only-5-oced-already-black-screen-death-2.html#post503334

http://www.computerforum.com/65750-gigabyte-965p-has-automatic-overclocking-c-i-a2.html#post501536

http://www.computerforum.com/60221-e6400-non-bios-overclocking-3.html#post454953

http://www.computerforum.com/55373-going-towards-2-6ghz.html#post411450

http://www.computerforum.com/65750-gigabyte-965p-has-automatic-overclocking-c-i-a2.html#post501536

lol...

Oh, and your temps are abnormally high. My idle is around 35*C @ 435 FSB, and max is probably 47*C (ish).

 

[ADE]

I think my CPU fan is not pulling as much air as it should be.