PSU can't start
- Thread starter dasos
- Start date
Ok I can show u an image. This very time I m writing with that mobo and that psu (new psu not arrived yet).
Restart works. But if I make shut down, start wont work.
Heres a video of what happens--> http://www.youtube.com/watch?v=NH29mtSdRsM
Only if I swich off psu maybe start button 'll work.
Restart works. But if I make shut down, start wont work.
Heres a video of what happens--> http://www.youtube.com/watch?v=NH29mtSdRsM
Only if I swich off psu maybe start button 'll work.
What make and model was the two you used that didnt work? The same for the one that works now.
I tried the same I work now.
Silverstone Nightjar 450W 80+ bronze fanless.
I have and tried 2 of them.
Silverstone Nightjar 450W 80+ bronze fanless.
I have and tried 2 of them.
Didnt understand that. Thats the two that didnt work. Whats in it now thats working?
Okedokey
Well-Known Member
bloody hell, im asking for a pic of the mobo, not the lights at the back
Throw up some photos with everything plugged in. Try to get the wires out of the way so we can see how eveything is plugged in.
tech savvy
Active Member
This is a quote from the actual manual to the GA-970A-UD3.
"To meet expansion requirements, it is recommended that a power supply that can withstand
high power consumption be used (500W or greater). If a power supply is used that does not
provide the required power, the result can lead to an unstable or unbootable system."
Nuff said.
"To meet expansion requirements, it is recommended that a power supply that can withstand
high power consumption be used (500W or greater). If a power supply is used that does not
provide the required power, the result can lead to an unstable or unbootable system."
Nuff said.
And which are those "expansion requirements"? There is graphics card of 200W, there is graphics card of 20W. Manual speaks for any devices you connect. But the point is, why someone can't start this mobo with a 450W psu.
WHAT would u do in my position, mr tech savvy?... I made everything someone would do.
Here r two images with the psu connections u want to see (4+4, 20+4) properly connected
and heres a small vid.
_________________
WHAT would u do in my position, mr tech savvy?... I made everything someone would do.
Here r two images with the psu connections u want to see (4+4, 20+4) properly connected
and heres a small vid.
_________________
Last edited:
There r some news.
I borrowed a 420W Xilence psu from a friend. And works...
System starts normally. Thats weird
Why system starts with Xilence 420W but can't start with Silverstone 450W?
Maybe because Silverstone is fanless?
Silverstone works with Ga ma 770t ud3, but cannot work with Ga 970a ud3.
I tried two Silverstones. I tried two Ga 970a ud3.
Can someone solve this riddle
I borrowed a 420W Xilence psu from a friend. And works...
System starts normally. Thats weird
Why system starts with Xilence 420W but can't start with Silverstone 450W?
Maybe because Silverstone is fanless?
Silverstone works with Ga ma 770t ud3, but cannot work with Ga 970a ud3.
I tried two Silverstones. I tried two Ga 970a ud3.
Can someone solve this riddle