Puzzled

Donaldmac

Member
Hi guys, so here is my problem. My sisters computer would turn on but freeze on load up, a new programme appears on the desktop called ilivid, so got the comp to load in safe mode and tried to remove this programme but couldn't find it anywhere, despite there being a working shortcut on the desktop. The comp wouldn't let me do a system restore so a tried to do a fresh install of windows 7 but the computer kept stalling and wouldn't let me install so I pulled the CMOS just incase that was the problem, after a did that it wouldn't go past the Foxconn screen, so a friend flashed the bios and it failed, so we flashed it again back to the first bios but couldn't get a output onto the monitor, then we bought another motherboard exactly the same and had the same problem with the output, getting nothing on the screen, the second motherboard was tested as working but as a said we got no output

Anyone got any ideas?
 
Last edited:
Cheers for getting back to me. We have tried 3 different processors, 4 graphics cards and 4 psu's. One of the processors was a 32 bit, and two were 64 bit.
 
It also seems to be fine. Wast sure if it was a bios issue as when it used to boot up the bios wouldn't let you select a different drive etc to boot from, just made up its own mind. Now we are stuck getting no output after flashing the bios.
 
check the compacitors on the motherboard...if any of them are bulged on top the issue could be the board its self.
 
Back
Top