Running fiber from house to shop.

[fildogg777]

Running fiber from house to shop. Attached is a sketch of how I plan on accomplishing this. The fiber will be passing through 20' of 2" PVC conduit that has four 2AWG aluminum service wires (240v).
Will it work? Thanks, Phillip.

 

[voyagerfan99]

Why wouldn't it?

 

[fildogg777]

My knowledge of networking is extremely limited. My concern is compatibility with my existing hardware and ISP. Thank you.

 

[johnb35]

I would check with your local building codes.

 

[beers]

Seems like you know what you're doing.

Also fiber doesn't care about voltage in the conduit.

 

[ScottALot]

If you want to try terminating fiber yourself, you could go with 50 micron multi-mode instead. The distance, application, and bandwidth you are working with would not be limited. If you just want to get it done, then run something pre-terminated and rated for outdoor application (OSP). If you foresee yourself putting more cabling in there, you could invest in maxcell/flexible conduit to prevent abrasion in the future.