Thanks, i have sucessfully oc'ed up to 2.5Ghz~2.7Ghz

C

Charles_Lee

New Member
i oc'ed my opteron 165 1.8Ghz all the way up to 2.7Ghz working on window, but it wasn't stable.
so i lowered it to 2.6Ghz and played half life 2 lost cost on a maximum graphics.
However when i tested on 3D Mark, i realized it wasn't stable,
so here i ended up with 2.5Ghz, and i am happy.
This beast is working 100% on anything, i got additional 200~250 points on 3D Mark, after oc'ed.

Thanks for helping me.
 
hehe, too much overclocking for today,
i will do some more next week, thanks alot though.
i will still get that as2 or something...
 
heya

Charles_Lee said:
i oc'ed my opteron 165 1.8Ghz all the way up to 2.7Ghz working on window, but it wasn't stable.
so i lowered it to 2.6Ghz and played half life 2 lost cost on a maximum graphics.
However when i tested on 3D Mark, i realized it wasn't stable,
so here i ended up with 2.5Ghz, and i am happy.
This beast is working 100% on anything, i got additional 200~250 points on 3D Mark, after oc'ed.

Thanks for helping me.
Click to expand...

What's the Vcore you are running at? My Venice would not go past 2.6Ghz at 1.55 so I had to raise it to 1.65 to get it stable at 2.7Ghz. I would not recommend a Vcore that high.

JAN :D
 
Glad it's going all right. If you haven't already, i'd run a stability test on both cores. Run two instances of Prime95, and set each instance to run on a different core.
 
jancz3rt said:
What's the Vcore you are running at? My Venice would not go past 2.6Ghz at 1.55 so I had to raise it to 1.65 to get it stable at 2.7Ghz. I would not recommend a Vcore that high.

JAN :D
Click to expand...

vcore: 1.34v
cpu: 33C

well, i tried increasing the vcore up to 1.43, and the clock speed as high as 2.7, quite stable, but the temmperture rose up to i think 44~50C.
and it would not run properly on 3D Mark,

i am sure my computer can handle more oc'ing,
but i don't want any pressure on the system...

i will still get as2 or something?
and a bigger fan for the back, and may be oc more... along with a video card
 
b00gi mAM said:
nah u want as5 its better... and a new heatsink
Click to expand...
His heatsink is fine..Zalman (its not stock) and ya, AS5 will do the trick, along with a 120mm fan in the back.
 
You must log in or register to reply here.
Back
Top