I had an older gateway that I disassembled and put the guts into a new case with new power supply, more ram, new hsf, etc. Everything is working fine except I can not install a video card (AGP 8x)
Motherboard is gateways version of the intel d865glc,
P4 2.8 ghz
1.5 gb ram
320 gb hd
400 watt power supply (video card specs state 300 or greater is recommended)
Video card is VisionTek hd2600 pro AGP 512mb
I disabled the onboard video in the devise manager and in display adapters in the control panel, and I know it was disabled because when I tried to boot with the onboard port, I had to boot to last known good config. No settings to disable in bios, as the onboard is disabled when a card is inserted. AGP is selected as primary video source.
Whenever I try to boot with the new card, or a known good AGP 64 mb card that I have, I get nothing but a black screen.
Help
Motherboard is gateways version of the intel d865glc,
P4 2.8 ghz
1.5 gb ram
320 gb hd
400 watt power supply (video card specs state 300 or greater is recommended)
Video card is VisionTek hd2600 pro AGP 512mb
I disabled the onboard video in the devise manager and in display adapters in the control panel, and I know it was disabled because when I tried to boot with the onboard port, I had to boot to last known good config. No settings to disable in bios, as the onboard is disabled when a card is inserted. AGP is selected as primary video source.
Whenever I try to boot with the new card, or a known good AGP 64 mb card that I have, I get nothing but a black screen.
Help
