Water cooling

G

georgi0u

New Member
Ok guys i want to go for a water cooling system. Im running a pretty tight rig but due to my prescott based dual core processor im running at pretty high temps (like 45-50 on idle). I know the basic components of a water cooling system (resevoir, cpu water block,pump and radiator) but i dont really know much more. I heard the cpu blocks with see through tops crack easy but i like the idea of running a uv reactive liquid through it. I was thinking of putting in a gpu block but i really dont think there'll be enough room in between my card and my add on cards, plus i dont really overclock it and its running pretty cool. I was thinkin of goin with a prefab system but ive heard its better to put together ur own. Any suggestions? Thankx....
 
Last edited:
Usually making your own kit will provide better performance, if you've picked good quality parts. But it also is also usually more expensive that way.

I suggest 1/2" thick tubing for maximum flow, which will provide lower temps. DangerDen makes GRAEAT quality parts if you can afford it.

Koolance makes OK kits, but you'll need to get better blocks and possibly a stronger pump to see a real gain over air cooling. Make sure you get some anti-freeze/"water wetter" to prevent buildup of algae and such in the lines, but if you replace the water frequently (every 3 months or so) that shouldn't be a problem.

Also, if you end up building your own OR buying a pre-fab kit...makes sure you leak test it for 42 hours OUTSIDE your system. just let it run. this will ensure nothing is cracked/loose and you wont be dealing with a wet computer when you install it.
 
The anti-freeze/water wetter is to help prevent corrosion. If you're not diligent with replacing the water, thean that can be a huge problem.

I heard some peeps say that all they use is straight distilled water, no additives, and they change there water every 2 months or sooner, no corrosion. Thats too often for some people, but if you're not gonna buy additives it's pretty much essential for a clea n running water system.
 
Yeti said:
Ethylene-glycol (antifreeze) drastically reduces heat transfer. Not too sure about it's anti-corrosive properties.
Click to expand...
I was going to suggest asking you yeti, but i hadn't seen you around for a while

You say it reduces heat transfer, so then its use in water cooling would be strongly advised against.
 
koolance1.jpg


I'm selling this on another forum.
New Koolance Case with Integrated liquid cooling setup internally, blue lcd screen for temp and fan adjustments, i replaced the fans with blue led fans to match the theme.
6 hard drive bays
5 cd drive bays
2 flobby bays
7 pci slots

Bought New for $300
Selling for $150 if you want ill cut u the deal
(Ive sold on ASEC and ASOG before, anadtech and XS forums)
aim x800venom
email [email protected]
cell 860 874 5115
 
to bad it that expensive to get that case to the netherlands. ( and to bad its got a side window tough)
but i do like that case :)
 
You must log in or register to reply here.
Back
Top