Will GeForce GTX 570 work with my pc?

VpS_Serenity

New Member
Hi, I was just wondering if the Nvidia GeForce GTX 570 will work and fit into my pc/motherboard.

I don't think I have PCI-Express 2.0, it doesn't say. :confused:
I'm not sure either if it will fit into the socket, but I attached a report with the program CPU-Z if it is any help at all.

I'm looking forward to play Saints Row: The Third at high graphics with a fairly good fps

Help greatly appreciated ASAP! :)
 

Attachments

Last edited:
I'm not sure, but on the power supply it says something like "DC 300W", I don't know if there's a smarter way to check it <.<

I also seem to have a 350W in my previous pc, and also a 420W that might still be working, it might be called Pentium IV & PFC. ATX switching power supply.
If it is any help at all
 
Last edited:
nvm,
Height 4.376 inches (111 mm)
Length 10.5 inches (267 mm)
Width Dual-Slot

The height, isn't that the width? i mean, the graphic card isn't gonna stand up inside ?
 
No, its the height from the slot to the top of the card. Width dual-slot means that it will cover two slots. Just make sure you have between 10.5 and 11 inches from the back I/O panel to your harddrive cage.
 
it looks like its about 12mm, maybe 12,5mm, from the motherboard and out to the cage, and the length from one edge to the other, seems to be just about max, if i move a few cables. how thick is it, do you know? thinking about if few of the cables touch the graphic card from the top, would it matter?
 
12mm. Thats just alittle less then a half of a inch! You mean inches? The card is two slots thick, meaning it will cover the slot below it.
 
lol my bad, 12cm of course what do you mean 2 slots thick? my motherboard only has 1 slot for graphic card, but i guess i could re-arrange the cables and work them around the graphic card, and maybe a few would lie on the top of the graphic card, would it be any issue?
 
You can use some ties to hold the cables up. When you install the card, the thickness of the card, it will go over/cover the slot below it.
 
In the first photo, see the little PCIe X1 slot/black. The card will cover that one up. It might come pretty close to the yellow USB port.

Single slot
macatirad-1313628117-1500.jpg

Dual slot
evga_geforce_9600_gt_01g_p3_n870_ar_1.jpg
 
Last edited:
i can measure the distance from the graphic card to the beginning of the yellow usb port above the graphic card, if have any idea about the measurements of GTX 570?
 
im not sure if they fit into the slots.. wait a second, that one above, lol, that's going from SATA1 to the air, does it matter which slots the SATA cables are in or is it like USB cables? just plug them into one of them? :o
 
Back
Top