001100010010
New Member
Hello, for the past week, I have been devoted to do this as I have a brand new edition of Windows 7 and am trying to get it onto my 270 Gigabytes Samsung mobile hard drive. At first I tried to just install it using the Windows 7 disk, but Windows doesn't let me install it because: "Windows cannot be installed to this disk. Setup does not support configuration of or installation to disks connected through a USB or IEEE 1394 port."
That had been annoying for a couple of hours while I researched on the internet for more ways to get this done. Finally, I have heard an idea where you install it on a partition on your drive then do a complete partition copy or a bit for bit copy of that partition. I installed it, and failed on a few early attempts as some things won't copy system files (ex. System Volume Information, pagefile.sys).
Then I finally got that done with Partition Master. Then I expanded further by using EasyBCD as command prompt was not fully understandable and had to download that. I added a new entry in the Bootloader, then restarted the system and finally, it starts. It starts not normally the way Windows 7 starts but with a more XP-like loading bar. When the loading bar blocks moved almost to the end it froze and gave a blue screen with this technical message: "*** STOP: 0x0000007B (0xFFFFF880009A9928, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)"
Do you people at Computer Forum have any idea how I can get this done?
I really want this to be finished as this was my dream ever since Vista came out! 
As you can see, I worked pretty hard on trying to figure this stuff out and I had no choice but come to you guys, and since this is my first post I hope I am lucky!
That had been annoying for a couple of hours while I researched on the internet for more ways to get this done. Finally, I have heard an idea where you install it on a partition on your drive then do a complete partition copy or a bit for bit copy of that partition. I installed it, and failed on a few early attempts as some things won't copy system files (ex. System Volume Information, pagefile.sys).
Then I finally got that done with Partition Master. Then I expanded further by using EasyBCD as command prompt was not fully understandable and had to download that. I added a new entry in the Bootloader, then restarted the system and finally, it starts. It starts not normally the way Windows 7 starts but with a more XP-like loading bar. When the loading bar blocks moved almost to the end it froze and gave a blue screen with this technical message: "*** STOP: 0x0000007B (0xFFFFF880009A9928, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)"
Do you people at Computer Forum have any idea how I can get this done?
I really want this to be finished as this was my dream ever since Vista came out! As you can see, I worked pretty hard on trying to figure this stuff out and I had no choice but come to you guys, and since this is my first post I hope I am lucky!
