I've got a little problem, my 3d mark result has become less after I upgraded my computer.
My setup was:
4200+ x2
1 gb DDR1 RAM
7800GTX 256mb
Samsung 400W Psu
Asrock 939N68PV-GLAN
I changed precessor, motherboard and RAM, because I needed optical output from the motherboard, and got the processor and RAM very cheap.
The new components:
AMD Athlon x2 6000+
Corsair 2x2 Gb 800Mhz DDR2 RAM
Gigabyte GA-MA78G-DS3H
Anyway, my 3Dmark result before the upgrade was about 5000 (don't have specific results).
With the new components, it decreased to 4200... http://img110.imageshack.us/img110/6863/3dmarkproblems.jpg
How's that possible? I didn't expect a huge result difference, but absolutely not less than before!
I've done everything I can, checked all contacts, removed and downloaded drivers, and so on.
I formated the computer and reinstalled the same version of xp (32bit).
Nothing was overclocked before, so what i've done is just changing processor, motherboard and processor.
Some info:
AMD Dual Core optimizer installed, used the same version of 3dmark both times (3dmark06), less program installed now than before, have tried the RAMs in both red and yellow inputs,
Here's two prints frpm GPUZ:
http://img382.imageshack.us/img382/2139/gpuz.jpg
http://img382.imageshack.us/img382/7483/gpuz2.jpg
The processor temp. is always about 38 degrease, +- 5.
Any ideas what's wrong?
My setup was:
4200+ x2
1 gb DDR1 RAM
7800GTX 256mb
Samsung 400W Psu
Asrock 939N68PV-GLAN
I changed precessor, motherboard and RAM, because I needed optical output from the motherboard, and got the processor and RAM very cheap.
The new components:
AMD Athlon x2 6000+
Corsair 2x2 Gb 800Mhz DDR2 RAM
Gigabyte GA-MA78G-DS3H
Anyway, my 3Dmark result before the upgrade was about 5000 (don't have specific results).
With the new components, it decreased to 4200... http://img110.imageshack.us/img110/6863/3dmarkproblems.jpg
How's that possible? I didn't expect a huge result difference, but absolutely not less than before!
I've done everything I can, checked all contacts, removed and downloaded drivers, and so on.
I formated the computer and reinstalled the same version of xp (32bit).
Nothing was overclocked before, so what i've done is just changing processor, motherboard and processor.
Some info:
AMD Dual Core optimizer installed, used the same version of 3dmark both times (3dmark06), less program installed now than before, have tried the RAMs in both red and yellow inputs,
Here's two prints frpm GPUZ:
http://img382.imageshack.us/img382/2139/gpuz.jpg
http://img382.imageshack.us/img382/7483/gpuz2.jpg
The processor temp. is always about 38 degrease, +- 5.
Any ideas what's wrong?