I am thinking about trying to get more life out of an old Dell XPS Computer built in 2000...For basic family use...And to boost its performance!
It has Windows ME, 128 MB RDRAM , AND AN 80 GIG HD (only 15 gigs used)
I was thinking of doing the following and wanted to know if this would be a sound idea to get a few more years out of the machine or at least have it as the families second computer:
Install 512 RDRAM - From newegg its about $82 for each 256 module( I need two) total $164
Partition the 80 Hard drive into two...Take the new 40 GB HD partition and install windows XP on that section so I can run both operating systems.
It is my understanding that I might have some issues with the current configuration running XP, so I was thinking of trying this to see what if any problems I might encounter using XP on this system.
Any help of feedback would be appriecated.
Here are the Spec's of the Computer:
CARD (CIRCUIT), PLANAR (MOTHERBOARD), NO SOUND, DIMENSION, BXXX, SOCKET
PROCESSOR, 80526, 1GHZ, 256, 133, FIBER CHANNEL
RAMBUS INLINE MEMORY MODULE, 128, 356M, 64X16, 8C
CARD (CIRCUIT), MEMORY BOARD, MEMORY, PRINTED WIRING BOARD, CONTINUITY, RAMBUS
CARD (CIRCUIT), CONTROLLER, ATA-100, PROCESSOR MODULE, BLD27, DIMENSION
CARD (CIRCUIT), MULTI-MEDIA, AUDIO, SANTA CRUZ
CARD (CIRCUIT), GRAPHICS, NVIDIA, 64MB, NV15, ULTRASTOR CORP
HARD DRIVE, 80G, I, 5.4K, 3.5" FORM FACTOR, 1N, NO CONTROLLER/NO CABLES, MAXTOR LEO
DIGITAL VIDEO DISK DRIVE, 680M, 12X, I, 5.25" FORM FACTOR, NEC CORPORATION, REVISION
It has Windows ME, 128 MB RDRAM , AND AN 80 GIG HD (only 15 gigs used)
I was thinking of doing the following and wanted to know if this would be a sound idea to get a few more years out of the machine or at least have it as the families second computer:
Install 512 RDRAM - From newegg its about $82 for each 256 module( I need two) total $164
Partition the 80 Hard drive into two...Take the new 40 GB HD partition and install windows XP on that section so I can run both operating systems.
It is my understanding that I might have some issues with the current configuration running XP, so I was thinking of trying this to see what if any problems I might encounter using XP on this system.
Any help of feedback would be appriecated.
Here are the Spec's of the Computer:
CARD (CIRCUIT), PLANAR (MOTHERBOARD), NO SOUND, DIMENSION, BXXX, SOCKET
PROCESSOR, 80526, 1GHZ, 256, 133, FIBER CHANNEL
RAMBUS INLINE MEMORY MODULE, 128, 356M, 64X16, 8C
CARD (CIRCUIT), MEMORY BOARD, MEMORY, PRINTED WIRING BOARD, CONTINUITY, RAMBUS
CARD (CIRCUIT), CONTROLLER, ATA-100, PROCESSOR MODULE, BLD27, DIMENSION
CARD (CIRCUIT), MULTI-MEDIA, AUDIO, SANTA CRUZ
CARD (CIRCUIT), GRAPHICS, NVIDIA, 64MB, NV15, ULTRASTOR CORP
HARD DRIVE, 80G, I, 5.4K, 3.5" FORM FACTOR, 1N, NO CONTROLLER/NO CABLES, MAXTOR LEO
DIGITAL VIDEO DISK DRIVE, 680M, 12X, I, 5.25" FORM FACTOR, NEC CORPORATION, REVISION
Last edited: