Xbox access through computer???

C

chris0276

banned
Is it possible to access your Xbox through your computer? What kind of equipment would you need? Both my Xbox and computer have network cards. Basically, I want to retrieve music and game profiles that are stored on the XBox hard drive and save it on my computer. Thanks.
 
I am not being a idiot, but read your setup manual.I just finished reading mine and it clearly expalins how to hook it up to a network.
 
myPCrocks said:
I am not being a idiot, but read your setup manual.I just finished reading mine and it clearly expalins how to hook it up to a network.
Click to expand...
It tells you how to netowkr it yes, but iirc, it doesnt tell you how to ftp it, which is what is needed.

Have a read through this
 
NOpe not with ps2... be sure to get unleash X instead of evo x.. ( i used to be a BIG modder.. after hlo got boring.. i was 35 legit and 37 modding on another account
 
helmie said:
Cool, can this be done with a PS2? I have two spare Network ports on ma router, so i have room for it :D
Click to expand...
Do you want to know how to install games to your PS2 via LAN? If yes read on.

I had not tried this until yesterday and have only just got it working. I had great difficulty in getting info on how to do this as most guides take you part way there and then stop.

What you will need

For this guide I will expext you to have the following:

Playststion 2 Console
HDD for the PS2
PS2 Network Adaptor
HDLoader/HDAdvance
PS2 Memory Card
PS1 Game

These must all be working together and you MUST be able to run games off the HDD

The only web address you will need is http://www.google.com/ and the will to use it.

Step 1 - FTP

To start off you will need to be able to FTP to your Playstation 2.

For this part you will need to connect your PS2 HDD to your computer. You will have to open your PC case to connect the HDD. Watch the jumper setting if you connect it to a slave channel.

Now you will need to download ExecFTP 0.68 and CDGenPS2 3.0.

Extarct both of the files and run CDGenPS2.

Now drag SYSTEM.CNF from the folder you just extracted ExecFTP to, into the right hand side of CDGenPS2.

Right click on the SYSTEM.CNF in CDGenPS2, select edit, check 'FIX LBA' and type '12231', then OK.

Drag CONFIG.DAT and EXECFTP.ELF into CDGenPS2, click image and save as '.iso' in your ExecFTP folder.

Download and extract hdl_dumb 0.7.3. Now install the image you just created to your localy connected PS2 HDD using this program.

Step 2 - Connecting

Connect your PS2 to your PC using a crossover network cable or hub/switch/router.

Boot your PS2 using HDLoader/HDAdvance and run your newly installed ExecFTP software. You should end up with FTP Server initialized on port 21...!

Now run FlashFXP on your PC and press F8 for Quick Connect. In the 'Server or URL' box type '192.168.0.10' (this should be the IP of the PS2). Chose the 'toggles' tab and clear 'Use passive mode'. Now hit 'Connect'.

You should now have a FTP connection to your PS2.
Click to expand...
There are 2 more steps, but they yell you how to copy games to the hard drive, which is illegal, so ileft it out.
 
You must log in or register to reply here.
Back
Top