Any Build Suggestions?

[wiwazevedo]

k so this is what i have come up with:

centurion 5 case
http://www.newegg.com/product/product.asp?item=N82E16811119068

Mobo
http://www.newegg.com/product/product.asp?item=N82E16813128012

geforce 7900gs
http://www.newegg.com/product/product.asp?item=N82E16814130056

psu
http://www.newegg.com/product/product.asp?item=N82E16817139001

c2d e6400
http://www.newegg.com/product/product.asp?item=N82E16819115004

ram (planning to add more in future)
http://www.newegg.com/product/product.asp?item=N82E16820231085

hd
http://www.newegg.com/product/product.asp?item=N82E16822144701

ext. drive
http://www.newegg.com/product/product.asp?item=N82E16827106045

this is the budget im loookin at so any suggestions try to keep it in the similar price range
i have no overclocking experience and i might do a little bit of that here and there with this setup
any help would be greatly appreciated!

 

[nmwords]

Well Assuming you are a gamer, If I were you I would go with a cheaper PSU and upgrade to this http://www.newegg.com/Product/Product.aspx?Item=N82E16814130074 . What operating system are you planning on using? If your using vista you might wanna up you budget if you want dx10 support

 

[PabloTeK]

I'd go with the Corsair unit; they're stable and very powerful indeed.

 

[Froboy7391_99]

For about $25 more you can get an 8600 Ultra or GTS(not sure which one it is now). Should be better(hopefully) than a 7900 GT and is also DX10.

 

[wiwazevedo]

I am going to be using xp and i already have it so it wont be factored into this budget

 

[wiwazevedo]

if i were to take nmwords advice would this be a good psu?
http://www.newegg.com/Product/Product.aspx?Item=N82E16817153028

i was suggested that i have at least 500W if i were to overclock

 

[ceewi1]

Those +12V rails are a little low for a PSU of that price, but it is sufficient for your system. I would suggest the Enhance ENP-5150GH instead.

 

[wiwazevedo]

12v rails? sorry im sorta new at this

 

[ceewi1]

The numbers next to the +12V1@ and +12V2@ on the spec sheet, or underneath the +12V1 and +12V2 on the label. Since modern computers pull most of their power from the +12V rails, the available power on the +12V rails is far more important than the total wattage. You can get much more information by reading the PSU101 guide.

 

[wiwazevedo]

thanks a bunch