JoeSamo
Member
okay im going crazy here i cant get my pc to even start up anymore. Ive been building a pc that consists of the following..
EVGA 320-P2-N815-AR GeForce 8800GTS 320MB 320-bit GDDR3 PCI Express x16 HDCP Ready SLI Supported Video Card
Seagate Barracuda 7200.10 ST3320620AS (Perpendicular Recording Technology) 320GB 7200 RPM SATA 3.0Gb/s Hard Drive
SAMSUNG 18X DVD±R DVD Burner with LightScribe and Software Black IDE Model SH-S182M/BEBM
OCZ Platinum 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Micron D7 Chip Dual Channel Kit Desktop Memory Model OCZ2N10662GK
XCLIO GOODPOWER 500W ATX 500W Power Supply
ASUS M2N32-SLI Deluxe Wireless Edition Socket AM2 NVIDIA nForce 590 SLI MCP ATX AMD Motherboard
AMD Athlon 64 FX-62 Windsor 2.8GHz Socket AM2 Dual Core Processor Model ADAFX62CSBOX
APEVIA X-CRUISER-BK Black Steel ATX Mid Tower Computer Case
I took my pc to a store near my house to run diagnostics and they said it was the motherboard or cpu so i sent them both back and reinstalled them and still my pc gets no signal to the monitor. I tried my vid card in another pc and it works.
WTF IS HAPPENING...im going so crazy trying to figure this out im positive everythings connected ive switched the ram around to other slots ive done the same with the vid card and ive pushed on them hard enough to make sure there in firm without damaging.
I did get the pc to start ONE TIME (this was before i sent the MB and CPU back for a replacement). It crashed after i changed one thing in the bios and now i still cant get it to work. Any ideas??
EDIT::: Best part is when they sent me the replacement MB they didnt sent the lil Bios beeper thing. Whoohoo **** you asus..
EVGA 320-P2-N815-AR GeForce 8800GTS 320MB 320-bit GDDR3 PCI Express x16 HDCP Ready SLI Supported Video Card
Seagate Barracuda 7200.10 ST3320620AS (Perpendicular Recording Technology) 320GB 7200 RPM SATA 3.0Gb/s Hard Drive
SAMSUNG 18X DVD±R DVD Burner with LightScribe and Software Black IDE Model SH-S182M/BEBM
OCZ Platinum 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Micron D7 Chip Dual Channel Kit Desktop Memory Model OCZ2N10662GK
XCLIO GOODPOWER 500W ATX 500W Power Supply
ASUS M2N32-SLI Deluxe Wireless Edition Socket AM2 NVIDIA nForce 590 SLI MCP ATX AMD Motherboard
AMD Athlon 64 FX-62 Windsor 2.8GHz Socket AM2 Dual Core Processor Model ADAFX62CSBOX
APEVIA X-CRUISER-BK Black Steel ATX Mid Tower Computer Case
I took my pc to a store near my house to run diagnostics and they said it was the motherboard or cpu so i sent them both back and reinstalled them and still my pc gets no signal to the monitor. I tried my vid card in another pc and it works.
WTF IS HAPPENING...im going so crazy trying to figure this out im positive everythings connected ive switched the ram around to other slots ive done the same with the vid card and ive pushed on them hard enough to make sure there in firm without damaging.
I did get the pc to start ONE TIME (this was before i sent the MB and CPU back for a replacement). It crashed after i changed one thing in the bios and now i still cant get it to work. Any ideas??
EDIT::: Best part is when they sent me the replacement MB they didnt sent the lil Bios beeper thing. Whoohoo **** you asus..
Last edited: