Black Hole - Benchmark (OLD Version)

Status
Not open for further replies.
I did it! 5.2ghz and 1944 points! But it crashed when saving image -.-
So it's only 5.15ghz....
1920 points!!
Spirit, my mobo is just a killer xD
Also didn't want to go above 1.51v :P, it was 81°C max btw.
515ghz.jpg
 
Nice job. Wish my 980x wasn't such a crappy overclocker, would have loved to crack 2k but it would take atleast 4.7ghz to do it.
 
87dtna said:
Nice job. Wish my 980x wasn't such a crappy overclocker, would have loved to crack 2k but it would take atleast 4.7ghz to do it.
Click to expand...

haha, I love my crappy mobo. I didn't think it would overclock over 4.8ghz xD.
Couldn't get 5.2ghz stable though, 5.1ghz is good enough :D
5.2 was only 20 points more, but crashed after taking a screenshot lol...
 
87dtna said:
My problem isn't the mobo its the chip.
Click to expand...

You're sure? I also thought it was a problem with the chip, but when I enabled load-line, disabled cpu spread centrum, enabled PLL overvoltage and set my memory on a.lower speed it oc'd over 5ghz! Maybe look into your settings? Or try adding more voltage?
 
Yes I'm sure. Temps are maxxed out. This isn't an 1155 quad it's a 1366 hex core, they run hot. Thats why they came with a 3 heatpipe 92mm tower cooler from the factory.

I told you earlier it wasn't your chip lol.
 
87dtna said:
Yes I'm sure. Temps are maxxed out. This isn't an 1155 quad it's a 1366 hex core, they run hot. Thats why they came with a 3 heatpipe 92mm tower cooler from the factory.

I told you earlier it wasn't your chip lol.
Click to expand...

Yeh, I know, but how hot does it get? The max temp of the 1st gen i7's is higher and max voltage too. Thought you had a watercooler on it?
 
At 101c it thermal throttles. I was hitting 100c at 4.46ghz 1.425v. I can boot 4.6ghz no problem, it just gets too hot.

Yes I'm running an EK supremacy copper plexi block and laing DDC pump. 1366 cpu's run hotter than you can even imagine when overclocked.
 
Last edited:
87dtna said:
At 101c it thermal throttles. I was hitting 100c at 4.46ghz 1.425v. I can boot 4.6ghz no problem, it just gets too hot.

Yes I'm running an EK supremacy copper plexi block and laing DDC pump. 1366 cpu's run hotter than you can even imagine when overclocked.
Click to expand...

Hmm, looking for some cooling options...
What other coolers do you have? And thermal paste always need a week or something to work properly.
You could try taking your pc outside with both side panels off :P? ( when it's night and cold)
 
DUDE, apparently you are not understanding how hot this chip runs. My watercooling setup blows any air cooling away. With an air cooler I doubt you'd get more than 4.2ghz out of it.
 
87dtna said:
DUDE, apparently you are not understanding how hot this chip runs. My watercooling setup blows any air cooling away. With an air cooler I doubt you'd get more than 4.2ghz out of it.
Click to expand...

I asked you had any other coolers, I didn't specify aircoolers...
But I think it's your best cooling coming from your reaction.:P
 
The proper thing to ask would have been do I have any other blocks.

The EK supremacy copper plexi is a very good block.
 
So, here's my server pc...
I thought it would be a bit better, but not.

39424920.jpg


What makes a xeon cpu better then a desktop cpu when doing things like servers for games, databases,...?
 
Reliability. The xeon chip can correct errors in memory that a desktop cpu cannot. if you get enough errors in normal non ecc memory you face data corruption, all the way down to a complete os corruption. Ive had it happen, ram is evil.
 
I'm hoping to get a 212+ and some AC5 for Xmas so I'll OC and post back with results then.
 
Finally got my server up. Future plans of BSEL mod for 1600 FSB which will give me 2.8ghz for a nice increase. When I get around to it...

E5410sstock.jpg
 
Last edited:
A little setFSB action yields some nice increases. Looks like I'll have to do the VID pin mod for higher CPU voltage before the BSEL mod. At 2.6ghz I now beat a stock 8120, not bad for 2 CPU's I paid $17 shipped for and a $70 motherboard.

E5410s26ghz.jpg
 
Last edited:
Status
Not open for further replies.
Back
Top