CMOS Bad or CMOS Error or Wrong Cmos Setup
First Step: I enter the BIOS Setup and Load Default settings and then I correct the date. I save and exit. Turn the computer off and power off for 1 minute.
Switch power on and computer on : same message appear - Wrong CMOS press F1 to continue or Del to enter setup.
Second Step: I replace the CMOS Battery (model 2032) with a new one, I even check the new battery voltage reading 3.3 Volts. I reconfigure the CMOS as in step 1. Save and exit. turn off the computer and power.
When i put on again same message appear - Wrong CMOS press F1 to continue or Del to enter setup.
Third Step : I turn off computer and power, remove the new battery. clear the CMOS with JUMPER and repeat Step 2 - Same ERROR.
NOTE: I even check if the battery is loose, but it's not
Could somebody please help me how can i correct this error.
First Step: I enter the BIOS Setup and Load Default settings and then I correct the date. I save and exit. Turn the computer off and power off for 1 minute.
Switch power on and computer on : same message appear - Wrong CMOS press F1 to continue or Del to enter setup.
Second Step: I replace the CMOS Battery (model 2032) with a new one, I even check the new battery voltage reading 3.3 Volts. I reconfigure the CMOS as in step 1. Save and exit. turn off the computer and power.
When i put on again same message appear - Wrong CMOS press F1 to continue or Del to enter setup.
Third Step : I turn off computer and power, remove the new battery. clear the CMOS with JUMPER and repeat Step 2 - Same ERROR.
NOTE: I even check if the battery is loose, but it's not