Gigabyte G1 sniper Z97 not booting and boot into colored screen

Discussion in 'Motherboards' started by r1s8k, Sep 21, 2018.

  1. r1s8k

    r1s8k New Member

    Messages:
    7
    Hello,

    I have problems with this motherboard before, I had similar problem before 2 months.

    I fixed that problem by clearing the CMOS, the PC booted OK, and I switched it OFF for later.

    Now, just before 1 week I switched it ON, it booted OK, the screen just freezed, I switched it OFF.

    Then I tried to switch it ON again but I only get colored screen on booting, nothing else.

    My hardware:
    1. i7 4770k
    2. Gigabyte G1 sniper Z97
    3. GTX 780 classified
    4. 1TB WD blue 3.5"
    5. 1TB TOSHIBA 2.5" from my laptop
    6. 212 EVO cooler
    7. 650W cooler master PSU
     
  2. johnb35

    johnb35 Administrator Staff Member

    Messages:
    40,909
    Colored screen sounds like a video card issue. Can you post a screenshot of it?
     
  3. r1s8k

    r1s8k New Member

    Messages:
    7
    I disconnected the GPU and HDDs, everything, same problem.

    I think it's the MB is broken! Could it be?
     
  4. johnb35

    johnb35 Administrator Staff Member

    Messages:
    40,909
    Have you tried building the motherboard outside of the case to verify motherboard isn't shorting out against the case?
     
  5. r1s8k

    r1s8k New Member

    Messages:
    7
    NO .. hmm let me try.
     
  6. Agent Smith

    Agent Smith Well-Known Member

    Messages:
    3,294
    Did you use the standoffs for the motherboard? Does the motherboard have the latest BIOS?
     
    r1s8k likes this.
  7. r1s8k

    r1s8k New Member

    Messages:
    7
    Now I can't do anything! The PC boots up directly to colored monitor, green, red, white, black, .... and so on.

    I tried to clear the CMOS, I tried to get the PC to boot into safe mode by switching ON/OFF multiple times, but the same result.
     
  8. r1s8k

    r1s8k New Member

    Messages:
    7
    I'm considering buying a new MB!

    It doesn't boot at all, goes into colored screen.
     
  9. r1s8k

    r1s8k New Member

    Messages:
    7
    [​IMG]


    What does this code mean?
     
  10. Darren

    Darren Moderator Staff Member

    Messages:
    11,282
    Related to your SCSI connection. Check your SATA mode, you want to be in AHCI mode.
     
  11. r1s8k

    r1s8k New Member

    Messages:
    7
    How? The PC isn't even booting anything, I get only colors on the monitor.

    The MB logo screen doesn't show up!

    This is my video I just uploaded on YouTube.

     

Share This Page