Gigabyte G1 sniper Z97 not booting and boot into colored screen

r1s8k

New Member
Hello,

I have problems with this motherboard before, I had similar problem before 2 months.

I fixed that problem by clearing the CMOS, the PC booted OK, and I switched it OFF for later.

Now, just before 1 week I switched it ON, it booted OK, the screen just freezed, I switched it OFF.

Then I tried to switch it ON again but I only get colored screen on booting, nothing else.

My hardware:
  1. i7 4770k
  2. Gigabyte G1 sniper Z97
  3. GTX 780 classified
  4. 1TB WD blue 3.5"
  5. 1TB TOSHIBA 2.5" from my laptop
  6. 212 EVO cooler
  7. 650W cooler master PSU
 

johnb35

Administrator
Staff member
Colored screen sounds like a video card issue. Can you post a screenshot of it?
 

johnb35

Administrator
Staff member
Have you tried building the motherboard outside of the case to verify motherboard isn't shorting out against the case?
 

r1s8k

New Member
Now I can't do anything! The PC boots up directly to colored monitor, green, red, white, black, .... and so on.

I tried to clear the CMOS, I tried to get the PC to boot into safe mode by switching ON/OFF multiple times, but the same result.
 

r1s8k

New Member
20181001_173512.jpg



What does this code mean?
 

Darren

Moderator
Staff member
Related to your SCSI connection. Check your SATA mode, you want to be in AHCI mode.
 

r1s8k

New Member
How? The PC isn't even booting anything, I get only colors on the monitor.

The MB logo screen doesn't show up!

This is my video I just uploaded on YouTube.

 
Top