llevvi
New Member
A friend sent me a H Buster Notebook to do maintenance and his HDD is failing according S.M.A.R.T. (status BAD)...
Using Hiren's boot CD I found Parted Magic tool and it gave me this log file:
(I wanna know if there is any way to fix it).
Log:
Complete error log:
SMART Error Log Version: 1
ATA Error Count: 1805 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1805 occurred at disk power-on lifetime: 816 hours (34 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 f8 77 a1 62 Error: UNC at LBA = 0x02a177f8 = 44136440
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 f8 77 a1 40 00 00:17:32.043 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:17:32.043 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:17:32.042 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:17:32.042 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:17:31.881 READ NATIVE MAX ADDRESS EXT
Error 1804 occurred at disk power-on lifetime: 816 hours (34 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 f9 77 a1 62 Error: UNC at LBA = 0x02a177f9 = 44136441
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 f8 77 a1 40 00 00:17:26.507 READ FPDMA QUEUED
60 08 00 20 08 00 40 00 00:17:26.507 READ FPDMA QUEUED
60 08 00 00 0a 00 40 00 00:17:26.507 READ FPDMA QUEUED
60 08 00 f8 0b 00 40 00 00:17:26.506 READ FPDMA QUEUED
60 08 00 f0 0b 00 40 00 00:17:26.506 READ FPDMA QUEUED
Error 1803 occurred at disk power-on lifetime: 816 hours (34 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 ff e7 42 65 Error: UNC at LBA = 0x0542e7ff = 88270847
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 f8 e7 42 40 00 00:17:19.365 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:17:19.365 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:17:19.364 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:17:19.364 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:17:19.281 READ NATIVE MAX ADDRESS EXT
Error 1802 occurred at disk power-on lifetime: 816 hours (34 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 ff e7 42 65 Error: UNC at LBA = 0x0542e7ff = 88270847
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 f8 e7 42 40 00 00:17:15.054 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:17:15.053 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:17:15.053 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:17:15.053 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:17:14.981 READ NATIVE MAX ADDRESS EXT
Error 1801 occurred at disk power-on lifetime: 816 hours (34 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 ff e7 42 65 Error: UNC at LBA = 0x0542e7ff = 88270847
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 f8 e7 42 40 00 00:17:10.564 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:17:10.564 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:17:10.564 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:17:10.564 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:17:10.492 READ NATIVE MAX ADDRESS EXT
Thanks!
Using Hiren's boot CD I found Parted Magic tool and it gave me this log file:
(I wanna know if there is any way to fix it).
Log:
Complete error log:
SMART Error Log Version: 1
ATA Error Count: 1805 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1805 occurred at disk power-on lifetime: 816 hours (34 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 f8 77 a1 62 Error: UNC at LBA = 0x02a177f8 = 44136440
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 f8 77 a1 40 00 00:17:32.043 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:17:32.043 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:17:32.042 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:17:32.042 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:17:31.881 READ NATIVE MAX ADDRESS EXT
Error 1804 occurred at disk power-on lifetime: 816 hours (34 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 f9 77 a1 62 Error: UNC at LBA = 0x02a177f9 = 44136441
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 f8 77 a1 40 00 00:17:26.507 READ FPDMA QUEUED
60 08 00 20 08 00 40 00 00:17:26.507 READ FPDMA QUEUED
60 08 00 00 0a 00 40 00 00:17:26.507 READ FPDMA QUEUED
60 08 00 f8 0b 00 40 00 00:17:26.506 READ FPDMA QUEUED
60 08 00 f0 0b 00 40 00 00:17:26.506 READ FPDMA QUEUED
Error 1803 occurred at disk power-on lifetime: 816 hours (34 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 ff e7 42 65 Error: UNC at LBA = 0x0542e7ff = 88270847
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 f8 e7 42 40 00 00:17:19.365 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:17:19.365 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:17:19.364 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:17:19.364 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:17:19.281 READ NATIVE MAX ADDRESS EXT
Error 1802 occurred at disk power-on lifetime: 816 hours (34 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 ff e7 42 65 Error: UNC at LBA = 0x0542e7ff = 88270847
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 f8 e7 42 40 00 00:17:15.054 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:17:15.053 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:17:15.053 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:17:15.053 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:17:14.981 READ NATIVE MAX ADDRESS EXT
Error 1801 occurred at disk power-on lifetime: 816 hours (34 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 ff e7 42 65 Error: UNC at LBA = 0x0542e7ff = 88270847
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 f8 e7 42 40 00 00:17:10.564 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:17:10.564 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:17:10.564 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:17:10.564 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:17:10.492 READ NATIVE MAX ADDRESS EXT
Thanks!