ssal
Active Member
This is my built:
AMD Ryzen 7 3800X Processor
ZOTAC GeForce GTX 1060 DirectX 12 ZT-P10620A-10M 6GB 192-Bit GDDR5X PCI Express 3.0 HDCP Ready Video Card
Corsair Vengeance LPX 32 GB (2 x 16 GB) DDR4-3200 Memory
EVGA - 600W ATX 12V/EPS 12V 80 Plus Power Supply - Black
ASRock B450M PRO4 Micro ATX AM4 Motherboard
HP EX920 1 TB M.2-2280 NVME Solid State Drive
Seagate Barracuda 2 TB 3.5" 7200RPM Internal Hard Drive X2
COUGAR MX330 Mid-Tower Case
LG Internal SATA 24x DVD CD +/-R & RW DL Disc Burner Re-Writer Drive OEM Bulk
DVI/Displayport cable
HDMI VGA Adapter
Additional Fans x3
Monitors:
Princeton 24" 1920x1080
HP S2331a 23.5" 1920x1080
Symptom
In Windows 11/Display setting, I set up two monitors with the extend option. Thus the monitors are designated as #1 and #2.
Monitor #1 would turn black screen for about 1-2 seconds and come back
It occurs more frequent when I launch a new application and frequency seems to much long after I am in the app for a while.
Monitor #2 has the black out briefly but very rarely. And it seems to stop after the computer starts up.
Things I've tried:
I swaped the monitor without changing cables. I also swape the cables.
In both cases, the problems remained with Monitor #1 and #2 had the very rare black out.
I went on Device Manager and made sure that the GPU graphic card driver is up to date.
Can someone give me an idea what was the cause and how to get around fixing it?
AMD Ryzen 7 3800X Processor
ZOTAC GeForce GTX 1060 DirectX 12 ZT-P10620A-10M 6GB 192-Bit GDDR5X PCI Express 3.0 HDCP Ready Video Card
Corsair Vengeance LPX 32 GB (2 x 16 GB) DDR4-3200 Memory
EVGA - 600W ATX 12V/EPS 12V 80 Plus Power Supply - Black
ASRock B450M PRO4 Micro ATX AM4 Motherboard
HP EX920 1 TB M.2-2280 NVME Solid State Drive
Seagate Barracuda 2 TB 3.5" 7200RPM Internal Hard Drive X2
COUGAR MX330 Mid-Tower Case
LG Internal SATA 24x DVD CD +/-R & RW DL Disc Burner Re-Writer Drive OEM Bulk
DVI/Displayport cable
HDMI VGA Adapter
Additional Fans x3
Monitors:
Princeton 24" 1920x1080
HP S2331a 23.5" 1920x1080
Symptom
In Windows 11/Display setting, I set up two monitors with the extend option. Thus the monitors are designated as #1 and #2.
Monitor #1 would turn black screen for about 1-2 seconds and come back
It occurs more frequent when I launch a new application and frequency seems to much long after I am in the app for a while.
Monitor #2 has the black out briefly but very rarely. And it seems to stop after the computer starts up.
Things I've tried:
I swaped the monitor without changing cables. I also swape the cables.
In both cases, the problems remained with Monitor #1 and #2 had the very rare black out.
I went on Device Manager and made sure that the GPU graphic card driver is up to date.
Can someone give me an idea what was the cause and how to get around fixing it?