Hello people!!!!
well im due to recieve my new Q6600 tommorow and thought i would post in advance for some help.
right i need help with the following things.
1)Memory timings - For some reason when i had my e6300 at 2.8Ghz i could only run this ram i have now at 6-6-6-18 or if i changed it to say 5-5-5-15 OR 5-5-5-18 and restarted ,i would get no display on the monitor and i had to reset the cmos to be able to boot again.
i plan to overclock to maybe 3.2-3.4Ghz if im lucky,my memory which is linked below can take up to 2.1v-2.2v
http://www.overclockers.co.uk/showp...l Channel Vista Gold Series DDR2 (OCZ2G8004GK)
2)Voltage for cpu and memory - now iknow its diffrent for every system,some may need more voltage than others but what voltage would you reccomend i set my Q6600 and my ram to to get to 3Ghz stable for starters?
3)Is there anything else i should know?
tks people
well im due to recieve my new Q6600 tommorow and thought i would post in advance for some help.
right i need help with the following things.
1)Memory timings - For some reason when i had my e6300 at 2.8Ghz i could only run this ram i have now at 6-6-6-18 or if i changed it to say 5-5-5-15 OR 5-5-5-18 and restarted ,i would get no display on the monitor and i had to reset the cmos to be able to boot again.
i plan to overclock to maybe 3.2-3.4Ghz if im lucky,my memory which is linked below can take up to 2.1v-2.2v
http://www.overclockers.co.uk/showp...l Channel Vista Gold Series DDR2 (OCZ2G8004GK)
2)Voltage for cpu and memory - now iknow its diffrent for every system,some may need more voltage than others but what voltage would you reccomend i set my Q6600 and my ram to to get to 3Ghz stable for starters?
3)Is there anything else i should know?
tks people